REFERENCES 



1. Christians, J. B. and E. P. Meisburger (1967). "Development of 

 Multi-Leg Mooring System Phase A - Explosive Embedment Anchor," U. S. 

 Army Mobility Equipment Research and Development Center, Report 1909A, 

 Fort Belvoir, Virginia, December 1967. 



2. Feltz, L. V. (1972). "Structural Design of Very High Velocity 

 Penetrometers," Proceedings of Conference, Rapid Penetration of 

 Terrestrial Materials, Texas A&M University, February, 1972. 



3. Smith, J. E. (1966). "Investigation of Free-Fall Embedment Anchor 

 for Deep Ocean Application," Naval Civil Engineering Laboratory, 

 Technical Note N-805, Port Hueneme, California, March 1966. 



4. Smith, J. E. (1971). "Explosive Anchor for Salvage Operations," 

 Naval Civil Engineering Laboratory, Technical Note N-1186, Port 

 Hueneme, California, October 1971. 



5. Smith, J. E., R. M. Beard, and R. J. Tayl6r (1970). "Specialized 

 Anchors for the Deep Sea," Naval Civil Engineering Laboratory, 

 Technical Note N-1133, Port Hueneme, California, November 1970. 



6. Taylor, R. J. and H. J. Lee (1972). "Direct Embedment Anchor 

 Holding Capacity," Naval Civil Engineering Laboratory, Technical Note 

 N-1245, Port Hueneme, California, December 1972. 



7. True, D. G (1972). Unpublished model test results, Naval Civil 

 Engineering Laboratory, Port Hueneme, California, 1972. 



8. Young, C. W. (1967). "The Development of Empirical Equations for 

 Predicting Penetrating Depth of an Earth-Penetrating Projectile," 

 Sandia Laboratories, Report No. SC-DR-67-60, Albuquerque, New Mexico, 

 May 1960. 



9. Young, C. W. (1970). "The Terradynamic Development of a Low- 

 Velocity Earth Penetrating Projectile," Sandia Laboratories, Report 

 No. SC-DR- 70-302, Albuquerque, New Mexico, June 1970. 



40 



