APPENDIX D: PLOTS OF EXPERIMENT PROFILES 



1. The plots shown in this appendix are results from the movable-bed 

 physical model plotted in model units. The solid profile line represents the 

 profile recorded after the specified number of waves, whereas the dashed 

 profile line marks the position of the previously recorded profile. All 

 profiles are center- line profiles except those denoted with an uppercase G 

 (glass sidewall) or an uppercase C (concrete sidewall) . Profiles of T12 and 

 T13 have been purposely omitted from this appendix. 



Test Description of Test Figure Number 



TGI Reproduction of prototype experiment using Figure Dl 



10-m horizontal width berm 



T02 Repeat of TOl to demonstrate repeatability Figure D2 



T03 Reproduction of prototype experiment using Figure D3 



11-m horizontal width berm (same as prototype) 



T04 Repeat of T03 with wave height increased by Figure D4 

 10 percent to examine impact of height variations 



T05 Repeat of T03 using absorbing wave paddle Figure D5 



T06 Repeat of T03 starting with the prototype profile Figure D6 

 at 40 waves molded in the flume to examine effect 

 of initial profile on evolution. 



T07 Repeat of T03 with wave period decreased Figure D7 



10 percent to examine impact of period variations 



T08 Repeat of T03 using irregular waves having H;^/3 Figure D8 

 equal to 141 percent of monochromatic wave height 



T09 Repeat of T03 using irregular waves having Hj^/3 Figure D9 

 equal to the monochromatic wave height 



TIG Repeat of T03 using regular waves with a Figure DIG 



vertical seawall at the intersection of the 

 revetment and SWL 



Til Repeat of TIO using irregular waves with H^/^ Figure Dll 



equal to the monochromatic wave height 



T14 Reproduction of prototype irregular wave test Figure D12 



Dl 



