"^5^ jncaes i>j£iY 123 



You can then go ahead finishing up the cement floor. The stalls and pens 

 may be set up at any time later when most convenient. 



When the concrete is set, the templates are removed and thrown away and 

 the stalls may be quickly bolted into place. 



On account of the shape of the anchors the curb is less liable to be cracked 

 by the expansion and contraction of the metal than it is when the upright pipe 

 extends through the concrete curb. 



Assembled Stalls — Knocked Down for Easy Handling 

 and Convenience in Erection 



No boxes filled with small parts — no long lists of little pieces — no com- 

 plicated directions — no difficult checking to see whether you are short anything. 



Instead, the equipment reaches you assembled — the fittings bolted in their 

 proper places on the stall frame. To put the stall together, you simply loosen 

 the bolts in the tee fittings, insert the uprights, stall partitions and other parts 

 of the stall — then tighten the nuts. 



You can't go wrong in erecting James Equipment. No expert help is 

 needed. One man can do it all, and the work of erecting is so simplified that it 

 takes but a very short time. 



Quick Shipment of Anchors 



You can get the anchors immediately — by express if you need them al 

 once — From Fort Atkinson, Elmira, Minneapolis, Wright Ziegler Co., Boston, 

 De Laval Dairy Supply Co., San Francisco, or from some nearby distributing 

 point. 



For the convenience of our customers and to provide quick service, stocks 

 of James Anchors will be carried in many places throughout the United States. 



Almost without exception, regardless of where you live, it will be possible 

 to deliver the anchors to you at your express station within twenty-four hours, 

 should you need them that quickly. 



Setting Up the Stalls 



Even in the pictures it is difficult to show how simple it really is to set up 

 the James stalls and pens. All the fittings are put in place on the stall posts, 

 partitions, horizontal bars, sure stops and sure stop connecting rods at the 

 factory, before shipment. There is no searching for the proper parts — no lost 

 parts — everything is simplified so that a boy can understand it all. 



Picture No. 1 shows the anchors with templates attached set in the concrete 

 curb form, ready for the concrete to be poured. 



No. 2 shows anchors in place and the form filled with concrete. 



