^^37^ JAOQGS WAV 149 



FRAME STYLE "A" 



(PATENTED; 



UPRIGHTS and HORIZONTALS: Upright stall posts are of pipe 1 5 g-mch out- 

 side diameter, thickness of pipe wall about . 1 4 inch ; horizontal is of the same 

 material 1 I/2 x 1 J/2 -inch square, thickness of wall about . I 3-inch. Patent applied 

 for. 



FITTINGS: Best malleable. Size and strength sufficient to withstand all strain. Dust- 

 proof type. (See page I 10.) 



ANCHORS: Heavy galvanized steel 2 inches wide; one furnished for each stall 

 upright post. Anchors have templates attached to make accurate setting of anchors 

 easy. Anchors are the only part of the stall required at the time concrete is laid, 

 if frame "A" is used; the stall is easily attached to the anchors at any time later. 

 (See page 118.) 



PARTITIONS: The James triple curve stall partitions as described on page I 1 1 made 

 of pipe I 5/g-inch O. D., thickness of pipe wall about .14 inch. 



WIDTH OF STALL: We carry in stock 3 feet 2 inches, 3 feet 4 inches and 3 feet 

 6 inches. 3 feet 6 inches width will be furnished if not otherwise specified. 



SURE-STOP: The swinging sure-stop consists of a post of l-jic-inch O. D. pipe 

 with the opening at the top closed with dust-proof ornament; dust-proof hinge 

 fittings are of best malleable; the rod connecting the row of sure-stops is J/2-inch 

 pipe, openings at ends closed with dust-proof ornaments. (See page 99.) 



FINISH: The steel is first mechanically cleaned removing scale, grease and foreign 

 matter, thoroughly preparing the material for painting; it is then finished with the 

 best grade protective enamel, baked for two hours at a high temperature. (See 

 page 125.) 



MANGER PATTERN: Will be furnished free or on request; made of hardwood exact 

 shape of manger partition bottom, that manger trough in the concrete may be so 

 shaped that the James complete manger or the manger division, depending on 

 pattern used, will fit accurately if you later wish to add the mangers to the stalls. 

 See page 1 20. Be sure to specify the style of manger pattern wanted — pattern 

 No. 1 for the complete manger and pattern No. 4 for the manger division. Pattern 

 No. 4 will be sent with all steel stall orders unless No. 1 is specified. 

 Shipped assembled, knocked down for convenience in handling and ease of erection. 



(See page 119.) 



FRAME STYLE "B" 



Exactly the same as frame "A" excepting that the swinging sure-stop is omitted and 

 two additional upright posts with anchors are furnished ; stall cannot be furnished less 

 than 4 feet in width, and 4-foot width will be furnished if not otherwise specified. 



THE MANGER 



MANGER DIVISIONS: (Patent applied for.) Heavy gauge galvanized sheet steel 

 reinforced by [,-4 x 1 -inch iron. A strong heavy malleable hinge that will not 

 slip holds division firmly in position. The U guard fitting around steel post holds 

 division rigid. Regularly furnished 14 inches high. (See page 137.) 



COMPLETE MANGER: Patented. The individual self-cleaning type. Constructed 

 of heavy gauge best galvanized sheet steel ; manger front and partition strongly 

 reinforced by folding and compressed edges. U-shaped guards on partitions overlap 

 the stall posts, and a V-shaped brace joins manger front and partitions, insuring 

 rigidity and preventing racking. Bottom of partitions rounded. (See page 131.) 



MANGER LIFTING SPRING : Patented. Special design of cold-drawn flat sprmg : 

 oil-tempered and tested for severe use; same quality as the best automobile spring. 

 Tension easily adjusted. Furnish four springs \vith five stalls. (See page 137.) 



