<^57^ Ji^fXlGS l^JAV 



177 



James Drinking Cup Type 6 



(PATENT APPLIED FOR) 



This IS the same cup as type 5, excepting that a valve similar to that used in type 3, 

 has been substituted for the valve in type 5. so as to adapt this cup to the pressure system. 



Provided with a large dram plug which can be readily removed, the dirt flushing 

 out as the water empties. A few quick strokes with a whisk broom or brush while water 

 is flo\ving out cleanses the cup thoroughly. 



No regulating tank is required for either drinking cup type 3 or type 6. The system 

 requires only cups and piping to connect with the water supply. 



James Drinking Cup Type 6. For Two Cows. Pressure System. 



James Drinking Cup Wash Tank 



(See Page 178) 



This equipment makes very simple the matter of cleaning the drinking cups. 



The tank, placed on a James milk can truck, can be passed along at the rear of the 

 stalls, the cups lifted from the stall post, emptied into the larger compartment of the tank, 

 then washed in the warmer water which is carried in the smaller compartment. 



SPECIFICATIONS 



To be used on truck shown above. 



Tank made of 1 8-gauge galvanized sheet steel, strongly reinforced at the top with 

 ^/g-in. X 1 %-in. x I, s-in. galvanized angles; all joints securely riveted and soldered both 

 inside and outside. 



Divided into two water tight compartments 17^4 inches long, 21 inches wide, 13 

 inches deep and 341/2 inches long, 21 inches wide, 13 inches deep. 



Over all dimensions of tank are 2A^^j\ inches wide, 53^4 inches long, 13 inches high. 

 With each wash tank is included a No. 1 9 Palmetto Garland sanitary brush. 



