<^5^ JAOQGS X^fl^ 251 



James Sanitary Calf Pen 



(PATENTED) 



SPECIFICATIONS 



CORNER POSTS: 1^ in. 0. D. pipe. Used with James Tubular Pen 



Anchors. 

 GATE POSTS: \'g in. 0. D. double strength pipe. Used with James 



Tubular Pen Anchors. 

 INTERMEDIATE POSTS: If in. 0. D. pipe. Used with James Tubular 



Pen Anchors. 

 PANEL HORIZONTALS: If in. 0. D. pipe. Top and bottom horizontals 



bolted together with 3^ inch cut thread bolts, spaced not more than 



six spmdies apart. 

 PANEL UPRIGHTS: l^V mch 0. D. pipe spaced approximately 5} inches 



on centers. 

 ANCHORS: James Tubular Pen Anchors V. in. 0. D. pipe, 9 in. long. 



Made of 24-gauge steel. Pen Anchors are the only part of the pen 



required at the time the concrete work is done. (See page 234.) 

 FITTINGS: Best annealed malleable. y^ in. cut thread bolts used 



with fittmgs for attaching panels to posts. 

 ORNAMENTS: Best malleable; dust-proof type. 

 GATE: Frame of l| in. 0. D. pipe with 1^^ in. 0. D. pipe uprights. All 



fittings of best malleable. Equipped with safety lock as on the bull 



pen. Hmges are offset so that gate swmgs back agamst pen; of best 



malleable, half the hinge clamped not only to the gate post but also to 



the upright next to it; the other half of hinge clamped not only to the 



gate frame but also to the upright next to it. 

 GATE LOCK: Best malleable. Double latch, connected by f in. square 



steel rod. Gate locks when slammed shut; can be opened only by 



hand, it being necessary to raise the lever and turn. Can not be opened 



by the animal. Simple, positive in action, strong. (See page 236.) 

 FINISH: The steel is first mechanically cleaned, removing scale, grease 



and foreign matter, then followed with a chemical bath, thoroughly 



preparmg the material for painting; It is then finished with the best 



gray protective enamel, baked for two hours at a high temperature. 



(See page 125.) 

 HEIGHT: With 6-in. curb, pen is 3 feet 10 inches from the floor. 

 WEIGHT: 22 lbs. per linear foot. 



SHIPPED ASSEMBLED IN PANELS 



James Calf Stanchions 



(PATENTED) 



James Calf Pen Panels will be fitted with James Calf Stanchions at a 

 slight additional cost. James Calf Stanchions are adjustable m neck space; 

 may be opened and closed one at a time or all together. Made of \y6 in. 

 0. D. pipe; fittings of best malleable; all stanchions connected with bar 

 steel lever. 



We recommend allowing 24 inches on centers for each calf: and not 

 less than 20 inches. 



Calf Pen Mangers 



(PATENTED) 

 Constructed the same as the James Complete Mangers for cow stalls, 

 described on page 243. excepting that James Calf Pen Mangers are made with 

 flat bottom, and without manger lifting springs. (See page 246 for illustra- 

 tion.) Calf Pen Mangers project 28 inches from the panel and are 20^ 

 inches deep. 



"Anti-Sucking" Guards 



(PATENT APPLIED FOR) 

 Made of I4-gauge galvanized steel, I0| in. x 36 in. Fittings of best 

 malleable, so constructed as to reinforce the guard. Guards held rigidly 

 in place by the fittings, but easily lifted and swung back against panel. Exact sizes of pipe used 



