^(5^ jAoaeis T^£^ 



259 



James Sanitary Hog Pen 



(PATENT APPLIED FOR) 



SPECIFICATIONS 



I5 in. 0. D. pipe. 



Used with James Tubular Pen 

 Used with James 

 Used with James Tubular 



CORNER POSTS: 



Anchors. 

 GATE POSTS: li in. 0. D. double strength pipe. 



Tubular Pen Anchors. 

 INTERMEDIATE POSTS: If in. 0. D. pipe. 



Pen Anchors. 



PANEL HORIZONTALS: If in. 0. D. pipe. Top and bottom horizontals 

 bolted together with yo- in. cut thread bolts, spaced not more than seven 

 spindles apart. 



PANEL UPRIGHTS: l^t in. 0. D. pipe spaced 4 inches on centers. 



ANCHORS: James Tubular Pen Anchors 3| in. 0. D. pipe, 9 in. long. 

 Made of 24-gauge steel. Pen anchors are the only part of the pen 

 required at the time the concrete work is done. 

 (See page 234 for illustration.) 



FITTINGS: Best annealed malleable. iV in. cut thread bolts used with 

 fittings for attaching panels to posts. 



ORNAMENTS: Best malleable, dust proof type. 



GATE: Frame of If in. 0. D. pipe with \xt, in. 0. D. pipe uprights. All 

 fittings of best malleable. Equipped with double latch and safety 

 lock. Hinges are offset so that gate swings back against pen; of best 

 malleable, half the hinge clamped not only to the gate post but also to 

 the upright next to it: the other half of hinge clamped not only to the 

 gate frame but also to the upright next to it. 



FINISH: The steel is first mechanically cleaned, removing scale, grease 

 and foreign matter, then followed with a chemical bath, thoroughly 

 preparing the material for painting: it is then finished with the best 

 gray protective enamel, baked for two hours at a high temperature. 

 (See page 125.) 



HEIGHT: With 4 in. curb, pen is 3 feet 8 inches from the floor. 



WEIGHT: 25 lbs. per linear foot. 



SHIPPED ASSEMBLED IN PANELS 



Swinging Panels 



(PATENT APPLIED FOR) 



FRONT PANEL: Horizontals of 1 1 in. 0. D. pipe, uprights 1-L in. 0. D. 



pipe. Hinge and all fittings malleable with cut thread bolts. Swinging 



mechanism best malleable and bar steel. 

 DIVIDING PANEL: Panels dividing pens are so constructed that when 



desired, they may be swung up and locked out of the way, thus turning 



two or more pens into one larger pen. 



Farrowing Rail 



(PATENT APPLIED FOR) 

 Made of 1| in. 0. D. pipe; hinge and rail brace of best malleable. 



Tilting Feed Trough 



(PATENT APPLIED FOR) 



Trough is of 18-gauge galvanized sheet steel; ends are locked seamed 

 with reinforcing plates on corners; angle iron dividers across the trough at 

 intervals of 12 inches, riveted to the galvanized sheets. Furnished with 

 device for holding trough down; and with a device for holding trough when 

 raised. 



Exact sizes of pipe used 



