^^^ JAOQGS T^AV 



285 



SPECIFICATIONS 



LEGS: Of '/4 X 1 in. bar steel, tied together by 

 a circle of the same material, well riveted. 



SEAT: Of seasoned birch, attached to a gal- 

 vanized sheet by screws. Seat attached to the 

 legs by bolts passing through legs, galvanized 

 sheet and the wood; bolt heads countersunk in 

 the wood seat. Wood stained mahogany and 

 covered with oil glaze. Legs and circle painted. 



SIZE: 12 inches high. Diameter of seat 9 

 inches; thickness 1 inch. Weight approxi- 

 mately 5 pounds. May be shipped by parcel 

 post, express or freight, as preferred. 



James Hog Trough 



(PATENT APPLIED FOR) 



Clean water and sanitary feed are 

 necessary for the good health of hogs. 

 The James Hog Trough is easy to clean 

 and easy to keep clean. It is so designed 

 that the hogs may get all the liquid. If any 

 liquid should be left in the trough in cold 

 weather, no damage will be done to the 

 trough because of its V-shaped bottom and 

 flaring sides, for the expansion of the form- 

 ing ice will be upward and not against the 

 sides. 



The trough is built of 1 8-gauge gal- 

 vanized sheet steel, ends are lock seamed, 

 with reinforcing plates on the corners; angle iron dividers across the trough at intervals of 

 12 in., riveted to the galvanized sheets. These angle iron dividers are so strong that 

 a man can stand on them without bending them; they not only give the trough great 

 rigidity and strength so that it cannot wrack, but they also separate the hogs, keeping 

 any one hog from monopolizing the entire trough. Hogs can't tip the trough. 



The legs of the trough are of angle steel, fastened to the trough with heavy rivets. 

 Vertical legs on one side in order that the trough may be backed up against a wall. 



The James Trough is the most economical trough to buy, as it costs but little more 

 than a wooden trough and will outlast many built of wood. 



