^<57Se J^iPQGS Ti^JAY 



299 



Channel Steel 



For protecting the rear edges of a concrete partition we furnish channel steel 4 in. x 

 1 K in. X -j^e '"•• 5^4 lbs. per foot. Supplied with anchors. 



We can also supply James supporting columns with channel steel, 2 in. x XYi in., 

 number 12 gauge, attached, for use at the rear of horse stall partitions of wood; also, 

 channels for use in front of stall partitions. The use of these channels makes it possible 

 to easily and quickly remove the planks from the partitions, should that at any time be 

 desirable. 



James Horse Stall Guards 



Light and sanitary, allows better ventilation, lets the sunlight strike the stall and 

 does not collect the dirt; more permanent than wood. Steel upright bars are much 

 better than wire mesh, for the wire does not have the strength and will rust out in a short 

 time. Harness hames will not catch in these bars and tear them out as they do with 

 the wire stall guards. 



SPECIFICATIONS 



Guard No. 1 



Guard made of channel iron 1 !4 '" '^ ' 

 Furnished either square or O. G. end 

 special. Height of guard 28 inches. 



Guard No. 2 



Uprights of '/2-in. round steel spaced 3 inches apart fitted into 1^4fi-in- O- D. top 

 horizontal and securely riveted through a I ^ in. x % in. channel below. Furnished 



m. X Yi in. with 

 Standard lengths 



/2-in. 

 6 ft.. 



round steel uprights. 

 but made any length 



either square or O. G. end. 

 of guard 26 inches. 



Standard lengths 6 feet but made any length special. Height 



