James Stall 14B-TA15 



(PATENTED) 



SPECIFICATIONS 



UPRIGHTS and HORIZONTALS: Upright stall posts are of pipe I f -inch outside diameter, 

 thickness of pipe wall about .14 inch; horizontal is of the same material l-i x \\ inch 

 square, thickness of wall about .13 inch. Patent applied for. 



FITTINGS: Best malleable. Size and strength sufficient to withstand all strain. Dust- 

 proof type. (See page 114.) 



PARTITIONS: The James triple curve stall partitions as described on page 1 15 made of 

 pipe If inch 0. D., thickness of pipe wall about .14 inch. 



SURE-STOP: The swinging sure-stop consists of a post of 1 j^-inch 0. D. pipe with the open- 

 ing at the top closed with dust-proof ornament; dust-proof hinge fittings are of best 

 malleable; the rod connecting the row of sure-stops is A-inch pipe, openings at ends 

 closed with dust-proof ornaments. (See page 1 03.) 



ANCHORS: Heavy galvanized steel 2 inches wide; one furnished for each stanchion and 

 each stall upright post. Anchors have templates attached to make accurate setting of 

 anchors easy. Anchors are the only part of the stall required at the time concrete is laid; 

 the stall is easily attached to the anchors at any time later. Patented. (See page 122.) 



STANCHION: James stanchion TA15 described on page 165. Patented. Alignment de- 

 vice; double chain hanger; side bars of carbon steel 1 j x I j x ^^-inch; lined with thor- 

 oughly seasoned birch securely attached; lock open device; cow-proof lock. 



FINISH: The steel is first mechanically cleaned removing scale, grease and foreign matter, 

 thoroughly preparing the material for painting; it is then finished with the best grade 

 protective enamel, baked for two hours at a high temperature. (See page 129.) 



MANGER PATTERN: Will be furnished free or on request; made of hardwood exact 

 shape of manger partition bottom, that manger trough in the concrete may be so shaped 

 that the James complete manger or the manger division, depending on pattern used, 

 will fit accurately if you later wish to add the mangers to the stalls. See page 1 24. Be 

 sure to specify the style of manger pattern wanted — pattern No. I for the complete 

 manger and pattern No. 4 for the manger division. Pattern No. 4 will be sent with all 

 steel stall orders unless No. 1 is specified. 



WIDTH OF STALL: We carry in stock 3 feet 2 inches, 3 feet 4 inches and 3 feet 6 inches. 

 3 feet 6 inches width will be furnished if not otherwise specified. 



WEIGHT: About 85 pounds per stall. 



Shipped assembled, knocked down for convenience in 

 handling and ease of erection. (Page 127.) 



James Stall 14B-X18 



(PATENTED) 

 Page 146. 

 Same specifications as above, except: 

 STANCHION: James stanchion XI 8 (Page 167). Patent applied for. Side bars made from 

 1 ]^-inch 0. D. steel pipe, lined with thoroughly seasoned birch; lock open clip; cow- 

 proof lock; chain hanger. 



James Stall 14B 



(PATENTED) 



Same specifications as 14B-TA15, except: 

 STANCHION: James stanchion 14J described on page 163. Door knob type of cow-proof 

 lock; James alignment device; lock open clip; James double chain hanger; James an- 

 chors; side bars of carbon steel tees I j x Ij x -j^-inch lined with thoroughly seasoned 

 birch securely attached. 



