'^ST^e JA{?aGS T^JAY 153 



James Stall 18E-XA18 



(PATENTED) 



SPECIFICATIONS 



UPRIGHTS and HORIZONTALS: Upright stall posts are of pipe If -inch outside diam- 

 eter, thickness of pipe wall about .14 inch; horizontal is of the same material I5 x 

 1 -J -inch square, thickness of wall about .13 inch. Patent applied for. 



FITTINGS: Best malleable. Size and strength sufficient to withstand all strain. Dustproof 

 type. (See page 1 14.) 



PARTITIONS: The James triple curve stall partitions as described on page 115 made of 

 pipe If -inch 0. D., thickness of pipe wall about .14 inch. 



SURE STOP POST: Rigid type; of 1 3^-inch 0. D. pipe and best malleable. 



ANCHORS: Heavy galvanized steel 2 inches wide; one furnished for each stanchion and 

 each stall upright post. Anchors have templates attached to make accurate setting of 

 anchors easy. Anchors are the only part of the stall requiredat the time concrete is laid; 

 the stallis easily attached to the anchors at any time later. Patented. (See page 122.) 



STANCHION: James stanchion XA 18. (page 167). Patent applied for. James alignment 

 device side bars made from Ij^-inch O.D. steel pipe, lined with thoroughly seasoned 

 birch lock open clip; cow-proof lock; chain hanger. 



FINISH: The steel is first mechanically cleaned removing scale, grease and foreign matter, 

 thoroughly preparing the material for painting; it is then finished with the best grade 

 protective enamel, baked for two hours at a high temperature. (See page 129. ) 



MANGER PATTERN: Will be furnished free or on request; made of hardwood exact 

 shape of manger partition bottom, that manger trough in the concrete may be so shaped 

 that the James complete manger or the manger division, depending on pattern used, 

 will fit accurately if you later wish to add the mangers to the stalls. See page 124. Be 

 sure to specify the style of manger pattern wanted — pattern No. 1 for the complete 

 manger and pattern No. 4 for the manger division. Pattern No. 4 will be sent with all 

 steel stall orders unless No. I is specified. 



WIDTH OF STALLS: We carry in stock 3 feet 2 inches, 3 feet 4 inches and 3 feet 6 inches. 

 3 feet 6 inches width will be furnished if not otherwise specified. 



WEIGHT: About 65 pounds per stall. 



Shipped assembled, knocked down for convenience in 

 handling and ease of erection. (Page 127.) 



