^<S7^ JAOOGS bJAV 157 



James Stall 14 A 



(PATENTED) 



SPECIFICATIONS 



UPRIGHTS and HORIZONTALS: Upright stall posts are of pipe If -inch outside diam- 

 eter, thickness of pipe wall about .14 inch; horizontal is of the same material 1^ x 

 R-inch square, ithickness of wall about .13 inch. Patent applied for. 



FITTINGS; Best malleable. Size and strength sufficient to withstand all stram. Dust-proof 

 type. ( See page 114.) 



PARTITIONS: The James triple curve stall partitions as described on page 1 15 made of 

 pipe If -inch 0. D., thickness of pipe wall about .14 inch. 



ANCHORS: Heavy galvanized steel 2 inches wide; one furnished for each stanchion and 

 each stall upright post. Anchors have templates attached to make accurate setting of 

 anchors easy. Anchors are the only part of the stall required at the time concrete is 

 laid; the stall is easily attached to the anchors at any time later. Patented. (See page 

 122.) 



SURE-STOP: The swinging sure-stop consists of a post of 1 ^^-inch 0. D. pipe with the open- 

 ing at the top closed with dust-proof ornament; dust-proof hinge fittings are of the best 

 malleable; the rod connecting the row of sure-stops is t-inch pipe, openings at ends 

 closed with dust-proof ornaments. (See page 103.) 



STANCHION: James stanchion I4J described on page 163. Door knob type of cow-proof 

 lock; James alignment device; lock open clip; James double chain hanger; James an- 

 chors; side bars of carbon steel tees Ij xlj x i^ - in. lined with thoroughly seasoned 

 birch securely attached. 



COMPLETE MANGER: Patented. The James individual self -cleaning type. Of 

 heavy gauge best galvanized sheet steel; manger front and partition strongly reinforced 

 by folded and compressed edges. U-shaped guards on partitions overlap the stall posts, 

 and a V-shaped brace joins manger front and partitions, insuring rigidity and prevent- 

 ing racking. Bottom of partitions rounded. (Seepage 135.) 



MANGER LIFTING SPRING: Patented. Special design of cold-drawn flat spring; oil- 

 tempered and tested for severe use; same quality as the best automobile spring. Ten- 

 sion easily adjusted. Furnished four springs with five stalls. (See page 141.) 



FINISH: The steel is first mechanically cleaned removing scale, grease and foreign matter, 

 thoroughly preparing the material for painting; it is then finished with the best grade 

 protective enamel, baked for two hours at a high temperature. ( See page 1 29. ) 



MANGER PATTERN: Will be furnished free or on request; made of hardwood exact 

 shape of manger partition bottom, that manger trough in the concrete may be so 

 shaped that the James complete manger or the manger division, depending on pattern 

 used, will fit accurately if you later wish to add the mangeers to the stalls. See page 1 24 . 

 Be sure to specify the style of manger pattern wanted — pattern No. I for the complete 

 mangers and pattern No. 4 for the mangerdivislon. Pattern No.4 will be sent with all 

 steel stall orders unless No. 1 is specified. 



WIDTH OF STALL: We carry in stock 3 feet 2 inches, 3 feet 4 inches and 3 feet 6jnches. 

 3 feet 6 inches width will be furnished if not otherwise specified. 



WEIGHT: About 1 15 pounds per stall. 



Shipped assembled, knocked down for convenience in 

 handling and ease of erection. (Page 127.) 



