^<57£e JAPQGS T:;JA.V 



209 



James Sanitary Calf Pen 



(PATENTED) 



SPECIFICATIONS 



0. D. pipe. Used with James Tubular Pen 

 D. double strength pipe. Used with James 

 in. 0. D. pipe. Used with James Tubular 



\\ 



% in. 0. D. pipe. Top and bottom horizontals 

 inch cut thread bolts, spaced not more than 



CORNER POSTS: U m. 



Anchors. 

 GATE POSTS: \l in. 0. 



Tubular Pen Anchors. 

 INTERMEDIATE POSTS 



Pen Anchors. 

 PANEL HORIZONTALS: 



bolted together with r, 



four spindles apart. 

 PANEL SPINDLES: \^_ inch 0. D. pipe spaced approximately 5j inches 



on centers. 

 ANCHORS: James Tubular Pen Anchors Sj in. 0. D. pipe, 9 in. long. 



Made of 24. gauge steel. Pen Anchors are the only part of the pen 



required at the time the concrete w'ork is done. (See page 192.) 

 FITTINGS: Best annealed malleable. x^ in. cut thread bolts used 



with fittings for attachmg panels to posts. 

 ORNAMENTS: Best malleable; dust-proof type. 

 GATE: Frame of \% in. 0. D. pipe with hV in. 0. D. pipe uprights. All 



fittings of best malleable. Equipped with safety lock as on the bull 



pen. Hmges are offset so that gate swings back against pen; of best 



malleable, half the hinge clamped not only to the gate post but also to 



the upright next to it; the other half of hinge clamped not only to the 



gate frame but also to the upright next to it. 

 GATE LOCK: Best malleable. Double latch, connected by § In. square 



steel rod. Gate locks when slammed shut; can be opened only by 



hand, it being necessary to raise the lever and turn. Can not be opened 



by the animal. Simple, positive in action, strong. (See page 194,} 

 FINISH: The steel is first mechanically cleaned, removing scale, grease 



and foreign matter, thoroughly preparing the material for painting. 



It is then finished with the best gray protective enamel, baked for two 



hours at a high temperature. (Seepage 129.) 

 HEIGHT: With 6-in. curb, pen is 3 feet 10 inches from the floor. 

 "WEIGHT: 22 lbs. per linear foot. 



SHIPPED ASSEMBLED IN PANELS 



James Calf Stanchions 



(PATENTED) 



James Calf Pen Panels will be fitted with James Calf Stanchions at a 

 slight additional cost, James Calf Stanchions are adjustable in neck space; 

 may be opened and closed one at a time or all together. Made of 1^ in, 

 0. D, pipe; fittings of best malleable; all stanchions connected with bar 

 steel lever. 



We recommend allowing 24 inches on centers for each calf: and not 

 less than 20 inches. 



Calf Pen Mangers 



(PATENTED) 

 Constructed the same as the James Complete Mangers for cow stalls, 

 described on page 137, excepting that James Calf Pen Mangers are made with 

 flat bottom, and without manger lifting springs, (See page 206 for illustra- 

 tion.) Calf Pen Mangers project 28 inches from the panel and are 20^ 

 inches deep. 



"Anti-Sucking" Guards 



(PATENTED) 

 Made of 14-gauge galvanized steel, lOJ in, x 36 in. Fittings of best 

 malleable, so constructed as to reinforce the guard. Guards held rigidly 

 in place by the fittings, but easily lifted and swung back against panel. 



Exact sizes of pipe used. 



