<^5^ JAOOGS TlxJAY 



299 



Square End 



(When guard shown above is used 

 m front of single horse stalls 

 (page 296) or in horse box stalls 

 (page 302), it may be had with 

 Grain Feeding Opening at sHght 

 additional cost. This opening is 

 provided with a device that per- 

 mits raising three of the spindles). 



O. G. End 



James Horse Stall Guards 



Light and sanitary, allows better ventilation, lets the sunlight strike the stall and 

 does not collect the dirt; more permanent than wood. Steel upright bars are much 

 better than wire mesh, for the wire does not have the strength and will rust out in a short 

 time. Harness hames will not catch m these bars and tear them out as they do with 

 the wire stall guards. 



Uprights of 



round steel spaced 3 inches apart fitted into 1 i^-in. O. D. top 



horizontal and securely riveted through a 1^ in. x ^4 in. channel below. Furnished 

 either square or O. G. end. Standard lengths 6 feet but made any length special. Height 

 of guard 26 inches. Fitting on upper horizontal provides adjustment if post to whicti 

 it is attached is not exactly vertical. 



Either style guards also furnished with 20-gauge galvanized sheet solid end, as illus- 

 trated above. 



Swinging Panel Front 



Horizontals and vertical frame of Ps-in. O- D. pipe. Spindles of Yi-in. round 

 steel rod. Fittings for clamping frame of best annealed malleable. Panel pivoted at the 

 top and furnished with swinging mechanism and stop. (See page 298.) 



