382 
The 2-1 pack is used for large size apples from 3in. upwards. 
The first fruit is one of the corners at the end of the case nearest 
the packer, the left-hand corner generally. The second fruit is 
placed in the opposite right-hand corner. The third fruit is sct 
between these two fruits as shown in the fig. and the fourth fruit 
should be placed in line with fruit No. 1. 
In Fig. A three rows of 5 apples each are shown and the pack 
is known as the 2-1, 5 x 5, which means that the three rows have 
4 apples each or 15 to the layer or tier. The five tiers will be alike 
and the number of apples will be 15 x 5 = 75 to the ease. 
Fig. B is packed with apples a little smaller and is made up 
of 2 rows of 7 apples each and one of 6 apples, or twenty to the 
tier. But as the second tier will have two rows of 6 apples and 
one of 7, the total for the tier will be 19. The third tier will be 
like the first, the fourth like the second, and the fifth or top tier 
will also be like the first and third. 
The number of apples will be 3 x 20 and 2 x 19, or 98 to the 
case. 
The 2-2 pack is used for apples going 2/in. to 3in. in diameter. 
THE 2-2 DIAGONAL PACK 
For Large Sizes 
First Layer Second Layer How to start 
a 2-2 Pack 
The 2 — 2 Diagonal Pack. For large sizes. 
The first fruit is placed in the left-hand corner nearest the 
packer. The second, also against the end of the box, with a space 
on either side as shown in the diagram. The third and fourth 
fruits are fitted into the spaces between the first and second and 
so on until the tier is all placed. 
