164 



THE BEE-HIVES. 



Fig, 72. 

 DIAGRAM or OUR HIVE. 



AAf cross-pieces to support tlie bottom, 18x2x2. B, bottom, 25xl7i^x 

 %. C, apron, lOxlT^xTt;. DD, front and rear of tlie liive, 16%xl2i4x 

 %. E, entrance, 8x%. F, double board nailed at the rear, IS^^xlSx 

 %. GO, square slats to support the cover. H, lath, Hxl%, to widen 

 the top edge of the front board. /, top bar of frame, 20V4xl% wide x 

 % thick. JJJJ, rabbets Va wide x% high, dug in front and rear boards, 

 and furnished with sheets of iron % inches wide, or metal spacers pro- 

 jecting ^ of an inch, on which the frame-shoulders are supported. If 

 the grooves are not provided with these, their size should be y2X%. 



KKKK shows how the uprights NN of the frames are nailed to the top 

 bar. M, bottom bar of the frame, 17%xi4x%. NN, sides of the frame, 

 lH4x5-16x%. PP, front and rear of the cap, 18%x9xT4. BR, front 

 and rear of the surplus-box, 16l^x6%x%. T, empty space on 

 top of the surplus-box, IVi for the cloth and mat. U, top bar 

 of the surplus-frame, same as top-bar 7. V, bottom bar of the surplus 

 frame, same as M. YY, sides of the surplus frames, 6xV4x%. 



The space between M and B is about Vo inch ; between DN, ND, VI, 

 BY, YR, should be % to % of an inch. Hives of every size can be 

 constructed on this diagram, with the only caution to preserve the 

 spaces of the width indicated. Both top bars are grooved on the under 

 side for foundation and wedge as per Fig. 69. 



