A, 
10. 
Ll. 
12. 
13. 
14. 
15. 
16. 
— 263 — 
One coal breaker with 500X320 mm. jaw opening, complete 
with driving pulleys and foundation bolts and plates. 
. One sheet iron shoot between the jaw breaker and the second 
screen, with bolts. 
. One excentric screen with 6 mm. dia. holes, same as item 2, 
but without plain bottom below. 
. One double sheet iron shoot from the second screen to the bell 
mills, with bolts. 
. Two bell mills, each of 1000 mm. dia., complete with driving 
pulleys and foundation bolts. 
. One regular shutter in front of the feed bucket elevator of the 
washery, mechanically driven, complete with guides, rollers, 
chain, shaft, bearings, tension-block, hand lever and all faste- 
ning screws. 
One feed bucket elevator, 350 mm, wide, and about 27 meters 
long between chain drums, chain of forged steel links, bolts, 
shafts with chain drums, ring lubricated bearings, tension 
arrangements, spurwheel countergear and driving pulleys and 
bolts. 
The iron frame work for the above elevator, with guide rails 
and wearing irons, supports and the complete sheet iron casing 
with all connecting and fixing bolts. 
One sheet iron hopper between elevator and distributing screw, 
with fixing bolts. 
One distributing screw conveyor, 450 mm. dia. & abt. 9000 mm. 
long, with water tight trough, outlets, bearings, spurgear, 
driving pulley and fastening screws. 
Twelve percussion screens, Humboldt-Wissmann system, with 
about 1 mm. meshes, complete with wooden frame and 
springs, driving mechanism, driving pulleys and holding down 
bolts. 
Theivon launders for the over size of the percussion screens, to 
the washers, with fastening screws. 
One set of washing boxes, including four compartments, with a 
total screen width of 4800 mm., consisting of the WI. boxes 
with set screens, plunger rods and plungers, adjustable excen- 
tries, shafts, hearings, loose collars, and driving pulleys, also 
dischargers, with adjusting levers and all fixing bolts. 
