— 269 — 
49, One fresh water centrifugal pump 250 mm. pipe diam., com- 
plete with ring lubricated bearings, pulley, bed plate and 
foundation bolts. 
50. The complete suction and delivery piping for the above pump, 
made of cast iron, including all packings, joints and flange 
bolts. 
51. The necessary driving shafting and pulleys for the above appa- 
ratus, including all bearings, couplings, loose collars, wedges, 
keys, fastening screws, disengaging gear and a complete set 
of spanners for bolts. 
Approximate total weight of the machinery A 179 1/2 tons. 
Total price of the machinery A. . . . . £5,280. 
B. Machinery for briquetting plant. Capacity, 10 tons, 3 kg. bri- 
quettes per hour 
1. One C. I. grizzly 12501250 mm. size, with angle iron frame 
and 40 mm. square holes. 
2. One bucket elevator 100 mm. wide < about 10000 mm. long 
between chain drums, complete with shafts, drums, bearings, 
tension arrangement, feed trough, driving gear, sheet iron 
casing and shoot. 
3. One n. 2 disintegrator, 640 wm. dia. of disc, complete with 
driving pulley and foundation bolts. 
4, One rotary scraping table 800 mm. dia., with beveled driving gear, 
scraping arrangement, bearings and fastening screws. 
5. One sheet iron receptacle for ground pitch underneath the 
disintegrator, with adjusting gear. 
6, One mixing disintegrator N. 4, complete with driving pulleys and 
foundation bolts. 
7. Onefeed hucket elevator 250 mm. wide X about 15,000 mm. long 
between chain drums, with shafts, drums, bearings, tension 
arrangement, spur wheel, counter gear and holding down 
bolts. 
8. One W. I. frame work, with guide rails and lower sheet iron 
casing and outlet shoot for the above elevator. 
