ACCESSORIES AND APPLIANCES 
hole in its side, the upper edge of which 
is 314” from top end of pipe. G is one 
6” board 1414” long and two 8” boards 
1514” long, assembled, so that the top 
ends are even, and the 8” boards nailed to 
edge of 6” board. H is heater board 151,” 
long and 6” wide, with a notch in upper 
end 4” wide and 534” deep, with two cross- 
pieces across its back 7%” thick, one flush 
with lower end of notch and the other 
with its lower edge 214” from lower end. 
H also forms back side of heater box. 
Nail one of D on front of heater board 
at lower end and one at bottom of notch 
at upper end; nail one of A on front of 
heater board over notch so its upper end 
will be flush with upper end of heater 
board; nail the other A on inside of right 
end of box directly over notch with its 
upper end flush with upper edge of box; 
nail one of B on left end of box, directly 
over notch and flush with upper edge of 
box. 
Now side right end of box up to bot- 
tom of notch with 4” beaded ceiling, be- 
‘ ginning flush with bottom. Nail on three 
pieces, the ends flush with outer edge of 
corner posts. The upper piece will extend 
107 
