HOW TO MAKE A CAT TRAP 



a V-shaped groove about a quarter of an inch deep across the treadle 

 board at right angles, and lSy 2 inches from the front end to fit over 

 top of fulcrum. Cut or plane the fulcrum piece to a ridge, 1 inch 



FlGLKK 1 



-A, Cat trap showing construction of door guidei 

 showing treadle-board assembly 



B39E3M; B4064M 



1>. side view of cat trap 





high, to fit into the groove in the treadle. Cut or plane edges of 

 drop door so that it will slide freely in guides. Cut an opening 

 4 by 5 inches in center of the rear end board and tack a piece of 

 2-mesh or 3-mesh wire netting over it to provide ventilation. 



60455°— 29 



