TOOL AND SUPPLY DEPARTMENT 



The "Dreer" Mower embuJica icuLuics vvIulIi enable us lu righily say that it has no superior. It is, of course, made of the best 

 material with the finest workmanship. The essential feature, however, is that it is made with plain bearings not with ball bearings. 

 It is the mistaken idea that ball bearing machines are the easiest running and generally the most satisfactory, but careful study will 

 reveal, however, that to maintain the initial efficiency of a ball bearing mower, money and labor must be spent from time to time to 

 instaU new bearings. 



The "Dreer" Mower is equipped with 5 extra wide blades of crucible tool steel, oil hardened and water tempered, a triple set of 

 gears on each side, has an extra long wheel base, cutting smoothly over uneven ground. The bottom knife has a raised edge and is of 

 tempered crucible steel, that can be adjusted to cut any height from { to li^ inches from the ground. 



The sharpening feature alone makes the "Dreer" Mower worth more than its cost to the user. 



The "Dreer" Mower is of course guaranteed. 



'Dreer' 



High Wheel Mower 



15-inch cut, wheels 10 inches high $25 00 



17-inch cut, wheels 10 inches high 28 00 



19-inch cut, wheels 10 inches high ■ 32 00 



21-inch cut, wheels 10 inches high 36 00 



* 'Dreer" Low Wheel Mower 



Constructed of the same high class materials as the high wheel, 

 but the drive wheels are eight inches high. 



12-inch cut, 5 blades., . .$15 00 | 16-inch cut, 5 blades.. . .$21 00 

 14-inch cut, 5 blades... . 18 00 I 18-inch cut, 5 blades.. . . 24 00 



Grass Catchers, for "Dreer" and 

 "Spring Garden" Mowers 



12-inch (Low Wheel) $3 00 1 15-inch (High Wheel) ... .$3 50 



14-inch (Low Wheel) 3 25 | 17-inch (High Wheel) 3 75 



16-inch (Low Wheel) 3 50 I 19-inch (High Wheel) ... . 4 00 



18-inch (Low Wheel) 3 75 | 21-inch (High Wheel) ... . 4 25 



Lawn Trimmers 



These machines are very serviceable for cutting close to walks 

 and fences or around beds. 



Pennsylvania Ball Bearing $10 50 



Pennsylvania Undercut 12 00 



Coldwell Trimmer 10 50 



Ball Bearing 



The "Spring Garden" 

 Mower 



To those among our customers who insist upon a ball bearing 

 machine we can recommend without reservation our "Spring Gar- 

 den" Ball Bearing mower. 



Made only in the high wheel type, with 10 inch wheels, five 

 blades of oil hardened and water tempered crucible tool steel; 

 double gears, one in each drive wheel; having a self sharpening, 

 raised edge tool steel bottom knife, and with perfect fitting ball 

 cups and cones, all insuring the best all-around, easy running 

 machine of its type made. 



15-inch cut $19 50 \ 19-inch cut $25 00 



17-inch cut 22 50 | 21-inch cut 28 00 



Pennsylvania Lawn Cleaner 



The cleaner will remove from the lawn, not only the cut grass, 

 but all sorts of litter and leaves, leaving the grass standing upright 

 and free from foreign matter. 



It is easy to operate, and with it one man will do more and better 

 work than four men with hand rakes. 



Can be supplied equipped with either rakes or brushes. 



The brushes are recommended for removing worm casts from 

 putting greens and tennis courts. 

 Please specify "Rakes" or "Brushes" when ordering. 



24-inches wide $30 00 



36-inches wide 42 50 



Extra Brushes, set of 3, 24-inch, $7.00; 36-inch, $9.00. 



POWER LAWN MOWERS 



The Coldwell Model "L" Motor Lawn Mower and Roller was designed to fill the need for a practical motor driven, 

 hand controlled lawn mower, making it possible to cut close up to and around trees, shrubbery, walks and driveways; to operate 

 efficiently on smaller areas and at the same time to cut from four to six acres per day on larger areas. 



The Model "L" is equipped with a 3i horse power Fuller-Johnson water cooled motor, cuts a swath 25 inches wide and weighs 

 approximately 400 pounds. Price, $350.00 f. o. b. Newburgh, N. Y. 



An extreme cutting width of 60 inches can be obtained with the Model "L" used in conjunction with the recently developed Cold- 

 well gang attachment, composed of two 20 inch roller bearing units, which attach to the rear of the Model "L," either one or both of 



which can be detached in a moment. Price of gang attachment $60.00. 



(213) 



