74 



GRIFFITH. TURXFR & CO.. BALTLMORE. MD. 



THE WALDRON & SPROUT VERTICAL FRENCH BURR HILL. 



THE BE5T BLRR STONE IILL EVER OFFERED TO THE TRADE. 

 The Celebrated Vertical French Burr Mills. Suitable for Grain or any Material that may be Ground in a .nili. 



I2=inch Mill. — Dimensions : Length over all, 56 inches ; width, 22 inches ; height, 31 inches ; 

 driving pulley S inches in diameter, 5-inch face, covered with leather ; weight. 430 pounds ; should be 

 run 1000 to 1200 revolutions per minute ; grinding capacit\-, 5 to 15 bushels per hour, according to 

 fineness of meal or feed and power used ; power required to operate above, 6 to S horse-power 

 engine. Price, 5100. 



I6=inch Mill. — Length over all, 64 inches; \ridth, 24 inches; height, 36 inches; floor space, 

 22x45 inches ; driving pulley, 10 inches in diameter, 6-inch face, covered with leather; weight, 800 

 pounds ; should be run 1000 revolutions per minute ; grinding capacity;, 10 to 30 bushels per hour ; 

 power required to run this mill satisfactorily, S to 12 horse-power. Price, $160. 



20=inch Mill. — Length over all, 77 mches : \ridth. 30 inches ; height, 41 inches ; floor space. 

 24x54 inches ; driving pulley, 12 inches in diameter, 10- inch face, covered with leather; weight, 1200 

 pounds ; should be run 900 revolutions per minute ; grinding capacity-, 15 to 60 bushels per hour ; 10 to 

 [5 horse-power engine required. Price, <2oo. 



24=inch Mill. — Length over all, Si inches ; width, 32 inches ; height, 51 inches ; floor space 

 occupied by base, 27x57 inches ; dri\-ing pulley, 16 inches diameter, 8-inch face, covered with leather ; 

 weight, iSoo pounds ; should run See revolutions per minute ; grinding capacity-, 15 to 75 bushels per 

 hour, according to fineness of feed and meal required and power used. This mill is adapted to any 

 place where it can have from 15 to 25 horse-power. It has the e»d motion silent shoe feed, and is filling 

 the place of the 30-inch in many places, as it will do almost as much work with less power, and is 

 easier to handle. Price, ^275. 



30=inch Mill. — Length over all, 78 inches ; width, 39 inches ; height, 55 inches ; floor space, 

 30 X 53 inches ; dri\'ing pulley, 20 inches in diameter, lo-inch face, covered with leather ; weight, 2500 

 pounds ; grinding capacit}-, 25 to 100 bushels per hour ; should be run 700 revolutions per minute ; 

 power required, 20 to 30 horse power. Price, 1^350. 



inPROVED CRU5HERS— TWO SIZES. 



Xo. I will crush 20 to 35 bushels of com on the ear per hour ; weight, 35c pounds ; driving pul- 

 ley, 16 inches diameter, 4-inch face ; should be run 300 to 400 revolutions per minute ; power required, 



2 horse-power. Price. 540. 



No. 2 will crush 60 to 90 bushels of com on the ear per hour ; weight, 500 pounds ; dj \\\x\% pul- 

 ley, 20 inches diameter. 4- inch face ; should be run 200 to 300 revolutions per minute ; power required. 



3 horse-power. Price. $60. 



It \rill pay you to write for catalogue and prices before purchasing elsewhere. 



GRIFFITH, TURNER & CO., General Agents. 



ALL KINDS OF MACHINERY REPAIRED. 



