GRIFFITH & TURNER CO., BALTIMORE, MD. 



CELEBRATED ROSS CUTTERS AND CARRIERS. 



THE upward cut used on this machine, whereby the knife rests natur- 

 ally on its bearings, is one of the popular characteristics of this 

 machine. By the upward cut the edges of the knives and the cutting 

 plate are both in full view, so that after sharpening and grinding, the 

 knives can be adjusted accurately and easily. By a perfect arrangement, 

 the feeding roller can open either parallel or obliquely and at the same 

 time retains all parts in perfect condition, and by opening obliquely will 

 feed heavily on one side and less on the other. They are self-feeding and 

 cannot clog or stop. 



The following are list prices of the Ross Cutters : — 



No. 7 Cylinder Hand Cutter $16.00 No. 9A or 90 Cylinder Hand Cutter $35.00 



" 7{ " " " 18.00 " 111, with Patent Table 50.00 



" 8£ " " " 25.00 " 113 and 13A, Cylinder Power Cutter. . 65.00 



" 8 with Knives in Balance Wheel 30 00 " 116 and 14A, " " f«. ....... 90.00 



" 10 " " " " " 36.00 



Less 30 per cent, to the farmers. 



PRICES OIF 1 CAEEIEES : 



Little Giant Carrier, 12 foot Angle and Straight for No. 09 $30.00 Each additional foot 



NewRossSwivelCarrierforLittleGiantNo.nl 36.00 



a a a (< a (( a a 3f) 00 " 11 



a a a a a a (( a \~IQ qq (( (( a 



(< a « a a a (( « \QQ 38 00 " " " 



" " " " " Ross " " 181 45.00 " " " 



a a a a a a a a 265 45 00 " " 



Less 30 per cent, retail. All of the above are 12-foot carriers. 



$1.50 

 1.75 

 1.75 

 2.00 

 2.00 

 2.50 

 2.50 



ON the foregoing page we have shown the advisability of the use of Shredders on cutters, and we 

 have no hesitancy in saying the Ross Shredder is one of the best in use. We can safely assert 

 from last year's experience that the demand for these Shredders will be ten times as great this year. 



The Ross Company has provided a Shredder for their entire line of old and new machines. It is 

 made in such a way that it can be replaced and repaired easily and inexpensively. It has eight lags to 

 a cylinder. These lags are filled with steel knives and are cast in the lag perfectly solid. They are set 

 in a zigzag form so as to lessen the amount of power, and they are set also so that one does not directly 

 follow the other from one lag to the other, this also lessening the amount of power required and mak- 

 ing the teeth strike closer together. In fact, every eighth of an inch of fodder is hit with the knives 

 so that it makes the shredded fodder very perfect, and we do not have as many pieces or thick pieces 

 as a good many of the other shredders produce. These lags are bolted to solid hubs on the main shaft 

 and with heavy machine screws, so that they are absolutely secure. 



Prices of Machines with Shredder Attachment and without Knife Cylinder: 



With No. 9A or 90 Shredder $35.00 



" " 111 Shredder with Patent Table. 50.00 



With No. 113 Cylinder Power Shredder.. . . $65.00 

 " " 116 " " " .... 90.00 



Less 30 per cent, to farmers. 



Sizes and List Prices of Ross Shredder Head as per Cut on Page 92. 



For No. 95 and 09 Machine $14.00 



" " 11A, 101, 111 " 18.00 



" « 13A, 103, 113 " 



" " 14A, " 



" " 106, 116, " 



a a 17 a 



19.00 

 20.00 

 21.00 

 30.00 



For No. 118, 108 Machine $30.00 



" " 18A, " 50.00 



" " 181, " 50.00 



M " 26A, " 65 00 



" " 261, " 65.00 



" " 265, " 65.00 



Discount same as on Cutters. 



ALL KINDS OF MACHINERY REPAIRED. 



