102 GRIFFITH & TURNER CO., BALTIMORE, MD 



The Waldron & Sprout Vertical French Burr Mill. 



SPECIAL 12-INCH MILL FOR LIGHT POWER. 



DIMENSIONS.— Extreme length, 36 inches; width, 19 

 inches; height, 34 inches : base occupies floor space, 

 17 x 17 inches ; driving pulley, 8 inches diameter, 5 inches 

 face. Speed, 800 to 1,200 revolutions per minute. The 

 burrs in this mill are each 12 inches in diameter, carefully 

 tested and tried. The runner is attached to the spindle by 

 a divided tapered sleeve and nut. The grinding capacity 

 is from 5 to 15 bushels an hour. 



It is furnished with ballbearings, and the shells are rab- 

 beted, turned and bored. It is well built and designed 

 for farm use. Weight, 400 pounds. 



Above cut shows Mill and Crusher combined. 

 Retail, f. o. b. factory, S40.50; f. o. b. Baltimore. 813.30. List, 875.00. 

 12=INCH. MILL. — Dimensions: Length over all, 56 inches; width, 22 inches ; height, 31 inches; 

 pulley, 8 inches in diameter, 5-inch face, covered with leather; weight, 430 pounds; should be run 1,000 

 to 1,200 revolutions per minute ; capacity 5 to 15 bushels per hour, according to fineness of meal or feed 

 and power used; 6 to 8 horse-power engine. Retail, f. o. b. factory, §54.00; f. o. b. Baltimore, 

 857.75. List, 8100.00. 



16=INCH. MILL. — Length over all, 64 inches; width, 24 inches; height, 36 inches ; floor space, 

 22 x45 inches; pulley, 10 inches in diameter, 6-inch face, covered with leather ; weight, 800 pounds ; 

 should be run 1,000 revolutions per minute ; grinding capacity 10 to 30 bushels per hour ; 8 to 12 horse- 

 power. Retail, f. o. b. factory, 886.10 ; f. o. b. Baltimore, 892.50. List, 8160.00. 



20=INCH. MILL. — Requires 10 to 15 horse-power engine; grinding capacity 15 to 60 bushels per 

 hour. Retail, f. o. b. factory, 81 OS. 00 ; f. o. b. Baltimore, 8115.00. List, 8200.00. 



• 24=INCI~I. MILL. — Requires 15 to 25 horse-power engine ; grinding capacity 15 to 75 bushels per 

 hour. Retail, f. o. b. factory, 8US.00; f. o. b. Baltimore, 815S.75. List, 82 75.00. 



30=INCH. MILL. — Requires 20 to 30 horse-power eng:"ne; grinding capacity 25 to 100 bushels per 

 hour. Retail, f. o. b. factory, 8201.75 ; f. o. b. Baltimore, 8218.75. List, 8325.00. 

 Write for special prices on Mill and Crusher combined. 



IMPROVED CRUSHERS-Tvvo Sizes-for above. 



No. 1 will crush 20 to 35 bushels of corn on the ear per hour ■ weight, 350 pounds ; pulley, 16 inches 

 diameter, 4-inch face ; should be run 300 to 400 revolutions per minute ; 2 horse-power. Retail, 

 f. o. b. factory, 824.00 ; f. o. b. Baltimore, 825.75. List, 810.00. 



No. 2 will crush 60 to 90 bushels of corn on the ear per hour ; weight, 500 pounds ; pulley, 20 inches 

 diameter, 4-inch face; should be run 200 to 300 revolutions per minute; 3 horse-power. Retail, 

 f. o. b. factory, 836.00 ; f. o. b. Baltimore, 838.50. List, 860.00. 



Elevator attachments to connect mill and crusher, Retail, 83.00. List, 85.00. 



Buckeye Steam Power Corn and Cob Mill. 



THIS mill is all iron and steel ; the weather has no effect on it. It is adapted 

 to steam power; 6 to 10 horse-power will run it. 

 It will grind corn and cob, shelled corn and oats (mixed or separate), 

 screenings, wheat, barley, rye, oil cake, peas and beans. With a 6 horse- 

 power engine it will grind from 15 to 20 bushels of chop, and with a 10 horse- 

 power it will grind from 30 to 40 bushels of chop per hour from dry grain. 



We furnish two sets of burrs with the Buckeye Mills, and a new set only 

 costs $1.50, and can be put in in a few minutes. 



Price of Mill witli two sets of Burrs, $50.00; less 

 $5.00 for cash. 



DIRECTIONS FOR OPERATING THE BUCKEYE STEAM POWER MILL. 



Speed of Mill. - Run the pulley shaft 600 to 800 revolutions per minute for corn in the ear ; 800 to 

 900 revolutions per minute on shelled or small grain. 



How to use Burrs.— The burrs in the mill are for ear corn and doing ordinary grinding. For 

 fine grinding use the burrs that are sent with the mill as extras. 



WE REPAIR ALL KINDS OF MACHINERY. 



