50 



,C. M. WOOLF & CO., Inc., 1005 B Street, N. W., Washington, D. C. 



Farming Implements — Continued 



McCormick Corn Binder 



The McCormick Corn Binder will cut corn of all lengths. 

 It will also work well in corn that is down, tangled, and 

 lodged. This is possible because the machine is provided 

 with convenient adjustments which enable the operator to 

 raise and lower the gatherer arms, so that the fingers of the 

 conveyor chains which extend to the points of the gatherer 

 arms can grasp and elevate corn that is lying almost flat upon 

 the ground. 



The band shifting 

 attachment also has 

 a wide range of ad- 

 justment, and the 

 bundle can be tied 

 around the center 

 even though corn be 

 extremely long or 

 short. 



Price, with Bundle Carrier $115.00 



McCormick Hay Tedder 



Tedded hay cures in a 

 very short time, and for 

 this reason the McCor- 

 mick Hay Tedder is an 

 invaluable machine for 

 the hay grower. When 

 it is used the farmer 

 can handle the hay crop 

 very quickly for the 

 reason that hay can be 

 tedded soon after it is 

 cut. 



The wheels, frame, 

 and forks are made of 

 steel, which insures a 

 substantial construction. The machine is driven by gears. 

 The gear wheel which is mounted on the center of the axle 

 drives the crank shaft to which the fork-arms are attached. 

 All the forks are therefore given the full driving force of 

 both wheels and the motion of the forks is uniform and posi- 

 tive — the heaviest hay will not retard the forks. 



6 Forks $40.00 



8 Forks . . 42.00 



McCormick Hand Dump Rake 



The McCormick Hand-Dump Rake is efficient in all condi- 

 tions of hay and fields. The weight of the driver is utilized 

 on this rake to help raise the teeth for dumping. Over- 

 cleaners are used on this rake, which act in the same thorough 

 manner as the under-cleaners on the self-dump rake. The 

 advantages of using over-cleaners instead of under-cleaners 

 on this rake is that the load is taken off the operator. Those 

 who prefer the band-dump rake will find that the McCormick 

 is built correctly. 



8 ft., 20 Teeth $19.00 



McCormick Self-Dump Hay Rake 



The best 'material is 

 used in the construction 

 of the McCormick Self- 

 Dump Hay Rake, which 

 is simple in both design 

 and construction. The 

 A'heels have staggered 

 pokes and a heavy 2- 

 inch channel tire. 



The teeth on the Mc- 

 Cormick rakes are 

 made of selected spring 

 steel, thus having great 

 strength and resiliency. The points of the teeth are so shaped 

 that they will get all the hay without digging into the ground 



or picking up stones. Both the self-dump and hand-dur 

 rakes can be operated with either one or two horses by simr 

 adjusting the shafts. The wheels are fitted with removal 

 hubs, which can be easily replaced at a small cost, thus pra 

 tically renewing the wheel. 



In a word, this rake is designed to have the maximv. 

 strength and rigidity with thjg lightest weight possible; a 

 agriculturists will find that the McCormick Self-Dump Ra 

 meets every requirement for gathering the hay into windrov 



Prices: 



8 ft., 20 Teeth, Self Dump $22.00 



9 ft, 23 Teeth, Self Dump 23.00 



10 ft., 26 Teeth, Self Dump 24.00 



McCormick Vertical Lift Mower 



The McCormick Ve 

 tical Lift Mower h 

 been designed for cu 

 ting on rough ai 

 stumpy ground, where 

 plain lift mower cou 

 not be used to good a 

 vantage. This mower 

 a practical machine f 

 all kinds of grass cv 

 ting. The cutter b. 

 can be raised to a vertical position and lowered without sta 

 ping the team. When the bar is raised, the machine is throv 

 in and out of gear automatically. This feature permits t) 

 driver to cut close to a tree, stump, or rock, and save all tl 

 hay without loss or time, or inconvenience. 



The McCormick Vertical Lift Mower will cut grass su 

 horses, and it will do good work under conditions where ; 

 ordinary machine could not be used. 



As an all-purpose machine, the McCormick Vertical L: 

 Mower is unsurpassed — it will do excellent work in unevi 

 fields where there are stumps and stones, as well as in ti 

 level fields. 



PRICES 



AVi ft. and 5 ft. Cut $43.50 



New Big Four, 6 ft. Cut 46.00 



New Big Four, 7 ft. Cut 49.00 



McCormick Little Vertical Mower 



The McCormick Little Vertical Mower has been designed 

 meet the demand for a mower of small capacity that can 

 pulled by one horse. It is adapted for mowing lawns, pari 

 orchards, and cemeteries, because it can be operated in plac 

 where a la.rge two-horse machine could not go. 



3y 2 ft. and 4 ft. Cut $38.50 



I H C HAY PRESSES 



I H C Two-horse Pull Power Hay Pres 



iz 



Sd Made in Three S 



14x18 in. bale chamb 

 16x18 in. bale chamb 

 17x22 in. bale chamb 



Light draft, capacity and durability are the three ma 

 points to be considered in buying a pull power hay pres- 

 The I H C two-horse pull power press is made almost entire 

 of steel and is, therefore, remarkably strong without beii 

 excessively heavy or unwieldy. 



The Pull Power Principle The Combined Leverage 

 The Toggle Joint Plunger And the Self-Feeder 

 are the principal features which in combination give a great 

 pressure in the bale chamber, and a larger capacity for t. 

 amount of power used than any other hay press. 



PRICES SUBJECT TO CHANGE WITHOUT NOTICE 



