50 



C. M. WOOLF & CO., Inc., 1005 B Street, N. W., Washington, D. C. 



Farming Implements — Continued 



McCormick Corn Binder 



The McCormick Corn Binder will cut corn of all lengths. 

 It will also work well in corn that is down, tangled, and 

 lodged. This is possible because the machine is provided 

 with convenient adjustments which enable the operator to 

 raise and lower the gatherer arms, so that the fingers of the 

 conveyor chains which extend to the points of the gatherer 

 arms can grasp and elevate corn that is lying almost flat upon 

 the ground. 



The band shifting 

 attachment also has 

 a wide range of ad- 

 justment, and the 

 bundle can be tied 

 around the center 

 even though com be 

 extremely long or 

 short. 



Prices upon application. 



McCormick Hay Tedder 



Tedded hay cures in a 

 very short time, and for 

 this reason the McCor- 

 mick Hay Tedder is an 

 invaluable machine for 

 the hay grower. When 

 it is used the farmer 

 can handle the hay crop 

 very quickly for the 

 reason that hay can be 

 tedded soon after it is 

 cut. 



The wheels, frame, 

 and forks are made of 

 steel, which insures a 

 substantial construction. The machine is driven by gears. 

 The gear wheel which is mounted on the center of the axle 

 drives the crank shaft to which the fork-arms are attached. 

 All the forks are therefore given the full driving force of 

 both wheels and the motion of the forks is uniform and posi- 

 tive — the heaviest hay will not retard the forks. 



6 Forks 



8 Forks 



Prices upon application. 



McCormick Hand Dump Rake 



The McCormick Hand-Dump Rake is efficient in all condi- 

 tions of hay and fields. The weight of the driver is utilized 

 on this rake to help raise the teeth for dumping. Over- 

 cleaners are used on this rake, which act in the same thorough 

 manner as the under-cleaners on the self-dump rake. The 

 advantages of using over-cleaners instead of under-cleaners 

 on this rake is that the load is taken off the operator. Those 

 who prefer the hand-dump rake will find that the McCormick 

 is built correctly. 



Price upon application. 



McCormick Self-Dump Hay Rake 



The best material is 

 used in the construction 

 of the McCormick Self- 

 Dump Hay Rake, which 

 is simple in both design 

 and construction. The 

 wheels have staggered 

 pokes and a heavy 2- 

 inch channel tire. 



The teeth on the Mc- 

 Cormick rakes are 

 made of selected spring 

 steel, thus having great 

 strength and resiliency. The points of the teeth are so shaped 

 that they will get all the hay without digging into the ground 



or picking up stones. Both the self-dump and hand-dump 

 rakes can be operated with either one or two horses by simply 

 adjusting the shafts. The wheels are fitted with removable 

 hubs, which can be easily replaced at a small cost, thus prac- 

 tically renewing the wheel. 



In a word, this rake is designed to have the maximum 

 strength and rigidity with the lightest weight possible; and 

 agriculturists will find that the McCormick Self-Dump Rake 

 meets every requirement for gathering the hay into windrows. 

 Prices upon application. 



8 ft., 20 Teeth, Self Dump 



9 ft., 23 Teeth, Self Dump 



10 ft., 26 Teeth, Self Dump 



McCormick Vertical Lift Mower 



The McCormick Ver- 

 tical Lift Mower has 

 been designed for cut- 

 ting on rough and 

 stumpy ground, where a 

 plain lift mower could 

 not be used to good ad- 

 vantage. This mower is 

 a practical machine for 

 all kinds of grass cut- 

 ting. The cutter bar 

 can be raised to a vertical position and lowered without stop- 

 ping the team. When the bar is raised, the machine is thrown 

 in and out of gear automatically. This feature permits the 

 driver to cut close to a tree, stump, or rock, and save all the 

 hay without loss or time, or inconvenience. 



The McCormick Vertical Lift Mower will cut grass suc- 

 horses, and it will do good work under conditions where an 

 ordinary machine could not be used. 



As an all-purpose machine, the McCormick Vertical Lift 

 Mower is unsurpassed — it will do excellent work in uneven 

 fields where there are stumps and stones, as well as in the 

 level fields. 



Prices upon application. 



41/2 ft. and 5 ft. Cut 



New Big Four, 6 ft. Cut 



New Big Four, 7 ft. Cut 



McCormick Little Vertical Mower 



The McCormick Little Vertical Mower has been designed to 

 meet the demand for a mower of small capacity that can be 

 pulled by one horse. It is adapted for mowing lawns, parks, 

 orchards, and cemeteries, because it can be operated in places 

 where a large two-horse machine could not go. 



Prices upon application. 



I H C HAY PRESSES 



I H C Two-horse Pull Power Hay Press 



Made in Three Sizes 



14x18 in. bale chamber 

 ki' 16x18 in. bale chamber 

 17x22 in. bale chamber 



Light draft, capacity and durability are the three main 

 points to be considered in buying a pull power hay press. 

 The I H C two-horse pull power press is made almost entirely 

 of steel and is, therefore, remarkably strong without being 

 excessively heavy or unwieldy. 



The Pull Pow-er Principle " The Combined Leverage 

 The Toggle Joint Plunger And the Self-Feeder 

 are the principal features which in combination give a greater 

 pressure in the bale chamber, and a larger capacity for the 

 amount of power used than any other hay precs. 



PRICES SUBJECT TO CHANGE WITHOUT NOTICE 



