^Q^d and Jlktat (?attiQt5 



Chain-Hoist Litter Carrier 



No. 59B 



This Carrier combines great strength and 

 rapid action. The hoisting chain is of special 

 strength and is of a length to correspond with 

 the shaft on which it winds. Carrier is 

 equipped with friction brake. Tub is made of 

 heavy galvanized sheet steel reinforced 

 around the top and ends with 1-inch angle 

 iron. The Carrier locks at both ends, which 

 increases its life. Bale is constructed of 1 by 

 IJ^-inch channel steel, strongly reinforced. 

 Chain-shaft is 1-inch cold rolled steel. The 

 fuU-swiveled, tandem trucks give greater 

 bearing on the track and ease in turning 

 corners. 



Tub 42 in. long, 28 in. wide, 24 in. deep, 

 inside measurements. Capacity, 12 bus. 

 Weight. 182 lbs $56.50 



Lever-Hoist Litter Carrier 



No. 42N 



Makes a clean job out of a dirty one 

 Specifications : 



Hoist: Ratchet and drum. Drops tub to floor 

 in an instant or it can be lowered slowly, 

 as desired. Lifts loaded tub in 10 seconds 

 or less. Tub has regular drop of 8 feet. 

 Extreme leverage and little friction make 

 it quickest and easiest lifting Carrier. 



Drum: Gray iron, x 7J^-inch diameter. 



Lifting Cable: Best crucible steel, J^-inch 

 diameter. 



Lift Cable Pulleys: Gray iron, 4i^-inch 

 diameter. 



Lever and Hoist Frame: 2 x J^-inch steel 

 bars. 



Tub: Hudson long-service construction; chan- 

 nel-bail reinforcement. 



Track Wheels: Roller bearings, 6-inch 

 diameter. 



Capacity: 12 bus. Size of tub, 42 x 28 x 24 

 inches. Weight, 205 lbs $69.00 







4'^ HUD 



FEFD 



SON 





Floor Feed Truck 

 No. 14IA 



A very convenient and durable Truck, 

 built of selected lumber well put together and 

 strongly reinforced. Load is evenly balanced 

 on wheels, making Truck easy to handle. 

 Wheels are located so that Truck may be 

 turned in its own length. 



Main wheels 14 inches high, with 2-inch 

 face. Caster wheel 7 inches in diameter. 

 Axle 1-inch cold rolled steel shafting. Capa- 

 city, 16 bus. 



Galvanized Steel Bottom 



No. 141A, with Steel Arch $56 50 



No. 141, less Steel Arch 53 00 



Hudson Track Equipment 



No. 102. Track Per foot, $0 18 



No. 90C. Track Hangers, with short 



extension and Nailing Plate. 37 

 No. 90B. Hangers, to clear 4 inches. . 40 

 No. 90F. Hangers, to clear 8 inches. . 45 

 No. 90L. Hangers, to clear 12 inches. 50 

 No. 90P. Hangers, to clear 16 inches. 55 



No. 262. Two-way Switch 12 00 



No. 263. Three-way Switch 13 00 



No. H15 Automatic Hog Waterer 



The Hudson Waterer is made so it will at- 

 tach to a %-inch pipe line, water tank or 

 barrel. 



No. H15. Weight, each, 12 lbs $2.75 



Hocking Valley Feed Cutters 



No, 9. Hand only $49 75 



No. 11. Hand and power 82 20 



No. 13. Hand and power 106 50 



Material Required for a Steel 

 Track Outfit 



For a 40-foot Bam — One Carrier, 40 feet 

 of steel track, 21 hanging hooks, 21 rafter 

 brackets, 5 knot-passing pulleys, 1 D. H. 

 Fork, 6 floor hooks, 110 feet i|-inch mamla 

 rope, 40 feet J^-inch reverse rope. 



For a 50-foot Bam — One Carrier, 50 feet 

 of steel track, 25 hanging hooks, 25 rafter 

 brackets, 5 knot-passing pulleys, 6 floor 

 hooks, 130 feet jf-inch manila rope, 50 

 feet J^-inch reverse rope. 



For a 60-foot Barn — One Carrier, 60 feet 

 of steel track, 31 hanging hooks, 31 rafter 

 brackets, 5 knot-passing pulleys, 6 floor 

 hooks, 160 feet i|-ineh manila rope, 60 

 feet ?/^-inch reverse rope. 



Hudson Adjustable Hay Carrier 

 No. 326 



A long wheel-base, heavy-duty fork Car- 

 rier, embodying all important features, such 

 as Hudson deadlock, swivel base, turned steel 

 axles recessed into the frame, wide mouth, 

 and interchangeability of parts. The 16-inch 

 wheel-base distributes the load over a greater 

 portion of the tr9,ck. Shipped complete with 

 Fork Pulley, Trip Block, and two End Stops. 



When ordering for other than Hudson 

 Track, specify name of track so that proper 



Trip Block can be furnished $12 00 



Steel Track. Per ft 25 



Track Hanger 20 



Myers' Clover Leaf Unloader 



Made of malleable iron throughout and has 

 16-inch truck. It is substantially built. Fit- 

 ted with large open mouth to receive the fork 

 pulley when approaching it from any direc- 

 tion. Has swinging fork, pulleys $12 00 



Steel Track. Per ft 25 



Track Hanger 20 



Harpoon Hay Fork 



No. 1. Double; 25-in. 

 tines $3 00 



No. \y2. Double; 3 1-in. 

 tines 3 25. 



No. 1 



GRIFFITH & TURNER CO., 205 N. PACA ST., BALTIMORE, MARYLAND 



75 



