112 GRIFFITH & TURNER CO., 205 N. PACA ST., BALTIMORE, MP. 



THE OLIVER MOWER 



The Oliver mower is an entirely 

 new machine of the "Big Frame" 

 Type. It represents the very latest 

 ideas In engineering and construc- 

 tion. Increased strength Is built in, 

 because mowers must 

 do harder work than 

 formerly. 



Light draft is as- 

 sured in the Oliver 

 Mower, because the 

 working parts are held 

 in accurate and per- 

 manent alignment. 



Removable bronze 

 bushings are used in 

 place of ordinary cast bearings, and offer long life without 

 "pounding" after mowing extensive acreage. 



The Oliver mower can be quickly and easily converted from 

 a plain to a vertical lift type. Only a minute or two is re- 

 quired to attach the coupling bar stop under the main frame, 

 and change the lift links from the lower to the top hole in 

 the inner shoe lifting arm, to make a vertical lift. The mower 

 is automatically thrown out of gear, when the cutterbar Is 

 raised above a cutting angle with either the high or vertical 

 lift. 



Price 



4% ft. . $92.50 



5 ft. 



95.00 



OLIVER SIDE DELIVERY RAKE AND TEDDER 



Curing hay in airy 

 windrows made with the 

 Oliver side delivery rake 

 makes a higher quality 

 hay. 



The Oliver side deliv- 

 ery can instantly be con- 

 verted to a tedder, mere- 

 ly by shifting a lever. 

 Thus, the Oliver Side de- 

 livery rake and tedder 

 combines in one machine all the equipment for best curing and 

 raking hay, for every kind of hay crop. 



Price 



No. 1-B — 8-ft., 48-tooth $120.00 



GRITCO RIDING WEEDER 



Price 



12-foot Weeder, with Pole. No double trees or neck 

 yoke . $36.00 



2.75 



3.50 



Regular Trees and Yoke add 



Extra Wide Trees and Yoke, add. 



OLIVER SELF-DUMP HAY RAKE 



8 ft., 24 teeth _ 



9 ft., 24 teeth _ 



10 ft., 32 teeth 



The strong, rigid frame on the 

 Oliver Self Dump Rake cannot 

 sag or twist. The frame Is angle 

 steel, not riveted together. It is 

 further prevented from sagging 

 by a heavy truss rod, which runs 

 the entire length of the frame 

 and supports the center of the 

 rake in the manner of a bridge 

 truss. 



Price 



$46.00 



49.00 

 53.00 



OLIVER DROP DECK CYLINDER LOADER 



The Oliver cylinder hay loader with 

 the drop deck combines in one simple 

 sturdy machine all of the best qualities 

 desired in a hay loader. Above every- 

 thing else, it is built to clean the hay off 

 the ground and place it on the load with- 

 out shaking off the leaves which are so 

 high in feeding value. 



The curved teeth pick up all the hay 

 in the windrow. The 8 cylinder bars, 

 with 16 teeth to each bar, are like a mul- 

 titude of small pitchforks which slide 

 under the windrow and deliver it to the 

 hay carrier without bunching or tearing 

 the hay apart. The speed of the cylinder 

 and the speed of the hay carrier are proportioned so exactly 

 that the hay is carried in a continuous ribbon from the win- 

 drow to the load. 



The Oliver drop deck does not depend on a complicated sys- 

 tem of springs and counterbalances to hold it in the desired 

 position. 



Price 



$130.00 



Single Cylinder Loader_ 

 Two Cylinder Loader 



147.00 



GRITCO V^EEDERS 



7% -foot Gritco Flat-Tooth Weeder. 

 9 -foot Gritco Flat-Tooth Weeder_ 

 Extra Teeth 



Price 

 _$13.00 



_ 16.50 



.25 



BELT DRESSING 



The Belt Dressing With the Bull Dog Grip 



There is nothing as troublesome as a slipping belt. It not 

 only loses power but the slippingr wears the belt out many 

 times faster than proper use. This belt dressing not only 

 prevents the belt from slipping but it also preserves the belt 

 and saves the power. 



The small cost of this wonderful dressing will produce for 

 you unlimited satisfaction. 



Xiarg-e Stick 



SOc 



ROPE PLOW LINES 



% Manilla Plow Lines, per pr., 42 ft 



% Manilla Plow Lines, per pr., 42 ft. 



% Cotton Plow Lines, per pr., 42 ft 



% Cotton Plow Lines, per pr., 42 ft 



..35c 

 .45c 

 . 50c 

 60c 



ALLIGATOR STEEL BELT LACING 



This steel belt lacing is recommended for strength, perma- 

 nence and quick, easy application. 



No. F25 for single leather and fabric belts from 3/16" 



to 7/32" thick. Boxes 6 sets for S in. Belts $1.60 



Single Sets .40 



No. G25 for single leather and fabric belts, from 3/16" 



to 7/32" thick. Boxes 8 sets for 12 in. belts 2.75 



Single Sets .50 



No. L27 for leather or 4-ply fabric belts up to 9/32" 



thick, Boxes of 8 sets for 12 in. belt 3.00 



Single Sets .55 



No. M35 for all belts from 9/32" to 5/16" thick. Boxes 



4 sets for 8 in. belts 1.60 



Single Sets .40 



ALL FBICBS IN CATALOQ SUBJECT TO CHANaE WITHOUT NOTICE 



