^ GRIFFITH ®, TURNER CO, 



on. 



17 



RITCO GUARDED FRAME LEVER HARROW 



The U-bars, channels, oscillating bars and teeth are made of high 

 airbon steel. The channels, being placed at the ends of the U-bars, 

 jrevent them from catching on obstructions as is frequently the case 

 inth the open end harrow. Strong and well made, but carrying no 

 superfluous weight. Corner braces, oscillating castings and lever cast- 

 iigs of malleable iron. 



Made in 25 and 30-tooth sections, and 

 ith %-in. or %-in. teeth. 

 aO-Tooth Harrow. Vj-inch Teeth. 



"Weight, 190 lbs $11.00 



50-Tooth Harrow, „ 



Weight, 195 lbs 11.50 



60-Tooth Harrow. 



60-Tooth Harrow, 

 Weight, 215 lbs 



%-inch 



Teeth, 



li-inch 



Teeth, 



%-inch 



Teeth, 



13.00 



ADJUSTABLE SPIKE TOOTH LEVER HARROW 



OITASDED FBASIZ: 



Tig. 23 A. 



This Harrow has a guarded frame of 

 I beam steel. Cross-bars or beams are 

 of round bar steel, similar to "U" bar, 

 but more closed, well braced and se- 

 curely fastened at each end to the frame. 

 This gives the Harrow strength and 

 rigidity, and is a gaurd against catching 

 into trees and stumps. The teeth are of 

 diamond-shaped steel. The runners are 

 formed by the curved tooth extension, 

 which is placed so that the Harrow 

 will free itself from trash better and 

 will carry the Harrow a more even dis- 

 tance from the ground than any other 

 Harrow on the market. The teeth are 

 held firmly by a welded eye steel bolt 

 through the malleable clip to roller bar; 

 also the end teeth on the roller bars, 

 which locks and holds the frame firmly together. Eacli tootli cuts its own course, and can be raised or lowered as desired, 

 and with the lever the teeth can be set to anv pitch or cut desired. 



50-tootli, 2 sections, $12.00; 60-tootli, 2 sections, $13.25; 75-tootIi, 3 section-s, $18.50; 90-tootli, 3 sections, $20.00. 



Special Discount for Cash. 



STEEL "U" BAR LEVER HARROW 



Bars "U"-shape steel, main cross or connecting bars 2-inch steel channels. Headed steel teeth %-inch and %-inch square 

 by 8-inch held firmly. Lever is attached to eacii section, by means of which teeth can be given any desired slant, for releas- 

 ing trash, pulverizing or smoothing. Teeth easily released for adjustment of depth or sharpening. 



Diagonal front bracts. Steel runners attached to each corner of each section and turned down whan teeth are thrown out 

 of srround for transportation. 



Made in 25 and 30-tooth sections. 



2-Section, 50-Tooth, y2-inch Teeth, Weight, 196 lbs $11.50 



2-Section, 50-Tooth, %-inch Teeth, Weight, 212 lbs 12.00 



2-Section, 60-Tooth, Vo-inch Teeth, Weight, 216 lbs 12.50 



2-Section, 60-Tooth, %-inch Teeth, Weight, 232 lbs 13.50 



BALTIMORE 

 DOUBLE HINGE HARROW 



40-Tooth $9.00 



4S-Tooth 10.25 



Special Discount for Cash. 



This is a two-section, wood-frame, spike tooth Harrow. 

 The runners, as seen in the cut. are intended to be used in 

 carrying the Harrow from one field to another. 



GARDENER'S HARROW 



This Harrow is similar to the Baltimore Double Hinge 

 Harrow, noted above, only it is made in one section instead 

 of two. It is designed to be used with one horse. We fur- 

 nish this Harrow with 30 teeth, which cuts 4 feet 6 inches 

 wide and with 25 teeth, cutting 3 feet 8 inches wide. 



FBICE. 



With '5 teeth $5.50 With 30 teeth $6.50 



GRITGO WOOD BAR LEVER HARROW 



Bars of 

 seasoned 

 oak, riveted at 

 each tooth. Teeth 

 headed and made from 

 best quality steel. Frame 

 painted red, teeth black; combi- 

 nation draw bars furnished for two, 

 three and four-section harrows when ordered. 



No. 2450 — 2-Section, 50-9/16-inch Teeth, Price $12.00 



No. 2450 — 2-Section, 50-%-inch Teeth, Price 12.50 



No. 2560 — 2-Section, 60-9/16-inch Teeth, Price 12.50 



No. 2560 — 2-Section, 60-%-inch Teeth, Price 13.00 



