GRIFFITH ®. TURNER CO. 



=0^ 



29 



"OHIO" SELF-FEED ENSILAGE CUTTER With Direct Blast Blower Elevator 



all tlin 



riio framt 

 are very much 



As compared with the -Ohio- Standard machines, there is more weight find "iPfi^ity 

 is heavier and well braced. The knife shaft is steel, 1-,^ inches d>ameter /^^^ knife heads adiustinff 

 lieaTrier the cvlinder larger in diameter, and there are four strongr holts in each knife m addition J^iit^^^J^^fjjJ^s 

 sit Screws at thf back tL raise o the feed roUs is greater, thus ffivingr more throat capacity and better feeding 

 luaHtil^ The conve^^^^ the knives carries the cut silage iutu the Ian case. A wire .sc.een .oxei^ llu. 



outer end of the conveyor case. ^ o * i 



The traveling feed table is full width of the machine and S feet 1 



ong, taking ^bundle of corn readily. 

 The new^patent-app'ried-for shredder blade should be run at 600 to 700 revolutions per mi""*^^]^:;!''';..^^^,';'; 

 in- and is a rfotable ad\^^^^ in construction, enabling tlie operator to shred dry fodder or cornstalks witn the 



in^. and it, a notaoic aa^aIlLe . compared with the tooth or saw blade type of shredder, be- 



o 12 capacity 8 to 10 tons per hour, fi to S-horse steam power. 



d...^. . . 



blower. There is a grreat saving in power also as 

 sides saving the leaves in much better condition. No, 

 No 14 capacitv 12 to In tons per liour, 10-liorse steam power 

 per hour In to 12-horse steam power. No. 19. capacity 



to 



power. Speed, 650 to 700 revolutions per minute. 



se steam 

 •red. 



SIZES AND PRICES. 



12. with four 12-inch knives, cuts I4, and 1 incli. and Blower 



complete, with new distributor for top of pipe .$160.00 



14 "Jlonarch" Cutter, four 14-inch knives, cuts %, \ and 1 inch, 

 and Blower complete with new distributor for top of pipe. ....... 185.00 



17 "Monarch" Cutter, four 17-inch knives, cuts Vi. ^ 1 inch. 



and Blower complete witli new distributor for top of pipe 220.00 



. 19 "Monarch" Cutter, four 19-inch knives, cuts i-i. % and 1 Inch. 



and Blower complete with new distributor for top of pipe 250.00 



inch galvanized pipe in 4, 6, S and 10-foot lengths for No. 14, 



No. 17 or No. 19 Cutter, per foot 



New Silo Tube, to distribute ensilage inside silo; made in 3-foot sec- 

 tions, hung together by hook and links; flexible, easily taken apart. 

 Top section 3 feet long with flaring top. List. $3.00. Other sec- 

 tions, 3 feet long, complete, each. List 



Extra gears to cut 4 inches long with two knives, Nos. 14, 17, 19. . . . 

 Shredder blades for No. 14. $3.00; No. 17. $3.75; No. 19, $4.15 each. 

 Machines, less 25 Per Ct. Knives, Shredder Blades and Extras, net prices, 



No. 17, capacity 15 to 20 tons 

 25 tons per hour, 12 to 14- 

 PuUey, 12x8 inches, leather 



No. 

 No 



10- 



"OHIO" STANDARD FEED AND 

 ENSILAGE CUTTER, No. 1 1 



Equipped with Blower 

 Elevator. 



This machine has been 

 made in order to meet a 

 growing demand for a Blow- 

 er Cutter to be operated with 

 light power — five to six-horse. 

 We 



The No. 11 Cutter has long been our most popular size 

 for light farm use. It Is adapted to cutting all kinds 

 of dry feed as well as ensilage, is strongl.v and durably 

 built, "has large capacity and requires but slight power to 

 run. The pipe is 7 inches in diameter and is made of 

 galvanized steel with standing seam on the outside, run- 

 ning lengthwise, being very rigid. It is made in 4, 6 and 

 10-foot lengths, with 7-inch slip joints and a clamping 

 band at each joint. The pipe connection at the fan case 

 is a swivel joint, which gives the pipe the proper angle 

 for convenience and best results, and allows it to turn in 

 any direction. Included with each machine is a hood or 

 elbow, which is to connect to upper end of pipe and convey 

 the cut ensilage into the silo. 



Set Pipe Nearly Perpendicular for Ensilage. Dry Peed 

 Can Be Blown in Any Direction. 



No. 11 — With two 11-inch knives, cuts 1 and 2-in. .$95.00 



No. 11 — With two shredder blades, no knives 96.50 



Above prices are for machines complete with Blower and 

 Hood, but no pipe. 



7-in. galvanized pipe in 4, 6 and 10-ft. lengths, per ft. •$ -60 



Extra gears to cut 4 inches long with two knives 3.50 



Cutting knives, each 



Shredder blades, interchangeable with knives, each. . . . 2.25 



Vofn Vo 11 Blow°r. r^-^de onU- with two knf ''^ 



Machines, less 25 Per Ct. Knives, Shredder Blades and 

 Extras, net prices. 



NEW STEEL TRUCK 



POB MOUNTING "OHIO" ENSILAGE CUTTERS. 



The frame is of steel throu,£rlii)Ut. The axles and 

 reach are made of 3-inch steel cliannels, the axle 

 channels being firmly bolted face to face over a wood 

 core. Distance between front and rear axles is 8 feet 

 4 inches. The wheel tread is 5 feet 2 inches. The 

 cast-iron wheels, 24 Inches in diameter, are built to 

 wear. The frame is securely put together. Wlien 

 mounted complete the machine is but 12 inches from 

 the ground and the top of feed table 4 5 inches from 

 ground. By sinking the wheels or removing them, 

 the axles may be let down on to the ground, in which 

 case the machine would be but 3 inches from ground, 

 the thickness of the steel reacli. The highest point 

 of feed table would then be only 36 inches from 

 ground, thus no staging or platform would be re- 

 quired to get corn to the machine. 



This outfit is suitable for all sizes of "Ohio" silage 

 cutters with traveling feed tables, both blower and 

 carrier styles, and is recommended as 

 a thoroughly practical, economical and 

 satisfactory mounting for all parties 

 who wish to move their machines fre- 

 quently or regularly. All parts are in- 

 terchangeable, and in case of accident 

 may be readily replaced. 



Price of Truck, without neck yoke or double trees, weight 600 

 lbs., $50.00. Less 25 per cent, retail. 



