GRIFFITH (SL TURNER CO. 



127 



OHIO" SELF-FEED ENSILAGE GUHER Wilh Dirept Blast Blower Elevator 



-Vs compared with the "Ohio" Standard machines, there is more weight and capacity all through. The frame 

 = '^lA ier and well braced. The knife shaft is steel, 1 inches in duuneter. The kaife heads are very much 

 heavier the cylinder larger in diameter, and there are four strongf bolts in each knife in addition to the adjusting' 

 set screws at the back. The raise of the feed rolls is greater, thiis giving more throat capacity and better feeding 

 qualities. The conveyor beneatli the- knives carries tlie cut silage into tlie Ian case. A wire screen covers the 

 iut-^r end of the conveyor case. , „ ^ ^ , ^ , . , j-, 



The traveling feed table is full width of the machine and S feet long, taking a bundle of corn readily. 

 The new patent-applied-for shredder blade should be run at GOO to 700 revolutions per minute while shred- 

 in" and is a notable advance in construction, enabling the operator to shred dry fodder or cornstalks witii the 

 blower There is a great saving in power also as compared with the tooth or saw blade type of shredder, be- 

 side^i savins the leaves in much better condition. No. 12. capacity S to 10 tons per hour, 6 to S-horse steam POwer.gJ 

 No 14 capacitv 12 lo I.t tons per hour, 10-horse steam power. No. 17, capacity 15 to 20 tons 

 per hour Id to 12-horse steam power. No. 19, capacity 20 to 25 tons P' 

 horse steam power. Speed, 650 to 700 revolutions per minute. Pulley, 12x8 inches, leather 



covered. 



SIZES AITS FSZCES. 

 12, with four 12-inch knives, cuts ^i. i.- and 1 inch, and Blower 



complete, with new distributor for top of pipe $160.00 



14 "Monarch" Cutter, four 14-inch knives, cuts Vj, % and 1 inch, 



and Blower complete with new distributor for top of pipe 185.00 



17 "Monarch" Cutter, four 17-inch knives, cuts Vj. % and 1 inch 



No. 



N. 



No. . . . . 



and Blower ctunplete with new distributor for top of pipe 220.00 



No. 19 "Monarcli" Cutter, four I'J-inch knives, cuts Vj, % and 1 Inch, 



and Blower complete with new distributor for top of pipe 250.00 



l')-inch galvanized pipe in 4, 6. 8 and 10-foot lengths for No. 14, 

 No, 17 or No. 19 Cutter, per foot 



New Silo Tube, to distribute ensilage inside silo; made in 3-foot sec- 

 tions, hung together bv hook and links: flexible, easily taken apart. 

 Top section 3 feet long witl^ flaring top. List. $3.00. Other sec- 

 tions. 3 feet long, complete, each. List 



Extra gears to cut 4 inches long with two knives, Nos. 14, 17, 19.... 



Shredder blades for No. 14. $3.00; No. 17, $3.75; No. 19, $4.15 each. 



Machines, less 30 Per Ct. Knives, Shredder Blades and Extras, net prices, 



i( 



OHIO" STANDARD FEED AND 

 ENSILAGE CUTTER, No. 1 1 



Equipped with Blower 

 Elevator. 



This machine has been 

 made in order to meet a 

 growing demand for a Blow- 

 er Cutter to be operated with 

 light power — five to six-horse. 

 Weight. 760 lbs. 



Fig. 801, No. 11. 



The No. 11 Cutter has long been our most popular size 

 for general farm use. It is adapted to cutting all kinds 

 ■>f dry feed as well as ensilage, is strongly and durably 

 built. har~ large capacity and requires but slight power to 

 run. The pipe is 7 inches in diameter and is made of 

 galvanized steel with standing seam on the outside, run- 

 ning lengthwise, being very rigid. It is made in 4, 6 and 

 10-foot lengths, with 7-inch slip joints and a clamping 

 band at each joint. The pipe connection at the fan case 

 is a swivel joint, which gives the pipe the proper angle 

 for convenience and best results, and allows it to turn in 

 .my direction. Included with each machine is a hood or 

 elbow, which is to connect to upper end of pipe and convey 

 the cut ensilage into the silo. 



Set Pipe Nearly Perpendicxaar for Ensilage. Dry Peed 

 Can Be Blown in Any Direction. 



No. 11 — With two 11-inch knives, cuts r.,. i and 2-in. .$95.00 



No. 11— With two shredder blades, no knives 96.50 



Above prices are for machines complete with Blower and 

 Hood, but no pipe. 



7-in. galvanized pipe in 4. 6 and 10-ft. lengths, per ft. .$ .60 



Extra gears to cut 4 inches long with two knives 3.50 



Cutting knives, each 1.50 



Shredder blades, interchangeable with knives, each. . . . 2.25 

 Note. — No. 11 Blower, made only with two kniv^'s 

 Machines, less 30 Per Cent. Knives, Shredder Blades and 

 Extras, net prices. 



NEW STEEL TRUCK 



POB MOUNTING "OHIO" ENSII.AGE CTTTTERS. 



Tlie frame is of steel throughout. The axles and 

 reach are made of 3-incli steel channels, the axle 

 channels bein.g firmly bolted face to face over a wood 

 core. Distance between front and rear axles is 8 feet 

 4 inches. The wheel tread is 5 feet 2 inches. The 

 cast-iron wheels, 24 inches in diameter, are built to 

 wear. The frame is securely put together. When 

 mounted complete the machine is but 12 inches from 

 the ground and the top of feed table 45 inches from 

 ground. By sinking the wheels or removing .them, 

 the axles may be let down on to the ground, in which 

 case tlie machine would be but 3 inches from ground, 

 the thickness of the steel reach. The highest point 

 of feed table would then be only 36 inches from 

 ground, thus no staging or platform would be re- 

 quired to get corn to the machine. 



This outfit is suitable for all sizes of "Ohio" silage 

 cutters with traveling feed tables, both blower and 

 carrier styles, and is recommended as 

 a tlioroughly practical, economical and 

 satisfactory mounting for all parties 

 who wish to move their machines fre- 

 quently or regularly. All parts are in- 

 terch.angeable. and in case of accident 

 may be readily replaced. 



Price of Truck, without neck yoke or double t 

 lbs., $50.00. Less 30 pel' cent, retail. 



\Vrii;!,t 600 



I 



