F. W. BOLGIANO & CO. 



Wiard Road or Contrac- 

 tors' Plows 



riie cut illustrates the >o. (>■"» Plow, which is very sub- 

 stantial, and is heavy enough for ordinary road or con- 

 tractor's work when used with two or four horses. 



A Cast Iron Point, made from the best quality of char- 

 coal iron, very strong and heavy. 



A Forged Crucible Steel Point. This point is made very 

 heavy, and is strong and durable, and can be forged or 

 drawn by any blacksmith. 



In ordering always specify which style of point is 

 wanted on the plow. 



The Shoe or Wheel as shown separate in cut, can be at- 

 tached, but is not sent with plow unless ordered. 



No. 65 Medium Weight, 200 lbs. 



Price, with wheel $16.00 



Price, without wheel 15.00 



Wiard Pavement or Rooter Plow 



No. 67. Four or Six-Horse. Weight with Clevis 250 lbs. 



This Plow has great strength and is adapted to con- 

 tractors' work and for tearing up cobblestone or Ma- 

 cadam pavements. 



Tlie Beam is made of charcosil cast iron, very strong 

 and heavy or cast Crucible Steel, as ordered,, The tend- 

 ency to wear off the lower front end of the Beam in this 

 class of Plows is entirely overcome by a separate shoe 

 casting attached to the beams at this point, which can 

 be replaced at slight expense when worn; this often 

 saves the cost of the beam. In ordering always specify 

 kind of Beam wanted. 



The point is 32 inches in length and one inch thick, and is 

 made from the best quality of forged steel. It is wedge 

 shape and pointed at both ends. The Point can be ex- 

 tended when it becomes worn by removing the bolts and 

 adjusting towards the front. It can also be reversed 

 end for end, making a point that has strength, durability 

 and great wearing qualities. It can be forged or drawn 

 by any blacksmith. 



The handles are made of steel, strongly braced, being 

 a new departure, as heretofore handles for this style 

 of Plow have been made of wood and were easily broken. 



The construction of this Plow throughout is iron and 

 steel, and is made to stand the wear and tear to which 

 this style of Plow is subjected. This Plow, together 

 with either of our Contractors' or Road Plows, makes 

 a pair that is unsurpassed for this class of work. 



The Shoe can be attached, but is not sent with Plow 

 unless ordered. 



Syracuse Steel Drag Scraper 



Contractors' Supplies 



Our Scrapers, like our Barrow Trays, are shaped cold 

 from a single sheet of steel, lapped and riveted at the 

 corners. They are uniform in thickness throughout, ex- 

 cept at corners, where they are of double thickness. 



No. 1. Cap, about 7 cu. ft. of earth, 98 lbs $5,75 



No. 2. Cap, about 5 cu. ft. of earth, 90 lbs 5,50 



No. 3. Cap, about 3 cu. ft. of earth, intended for 



use of single horse, 85 lbs 5. ."25 



No. 2. Syracuse Wood Tray Canal $2.00 



No. 120. Syracuse Steel Tray Canal 3.50 



No. 75. Syracuse Steel Tray Mortar 4.25 



No. 80a. Syracuse All-Steel Mortar 5.50 



No. 85a. Syracuse All-Steel Mortar 4.25 



No. O. Rex Steel Tray Canal 3.00 



Adriance Buckeye Mowers 



Our system of gearing has been used by us since 1857. 

 Bevel and spur gear is employed in accordance with the 

 most scientific mechanical usage to secure the greatest 

 durability and the best results with the least expendi- 

 ture of power. 



UNIQUE AND UNEQUALED. No other mower has 

 gearing as simple or with so long a record of success. 

 Both pinions are large, with well formed cogs, durable and 

 efficient. 



Roller Bearings 



The rollers in our bearings are in cages which keep 

 them in hne with the axle, and also prevents them from 

 falling out if for any reason the bearing is removed from 

 its place. The value of a roller bearing depends upon .se- 

 curing and maintaining the absolutely parallel relation of 

 shaft and rollers and a good fit to shaft and casing. 



A roller bearing without retaining cages is worse than 

 none, as the rollers will lose alignment with the shaft, 

 and then heavy draft and rapid v/ear is sure to follow. 

 Such bearings are also difficult to put in place in the 

 event of the probable necessity of removing them for 

 renewal. They are cheaper for the builder but not for 

 tlie farmer, and they will not do for Adriance machines. 



Milwaukee Mowers 



For years this mower has stood at the head of the 

 list for general work. We cannot say too much for it. 

 Light draft, reliability of work, fewness of repairs, even- 

 ness of cut. All combine to make this mower a leader. 

 Catalogues on application. 



WE CARRY REPAIRS FOR ALL 

 LEADING MAKES OF MOWERS 



