182 



^ GRIFFITH ®. TURNER CO ^ 



0>5 



ROSS IMPROVED ENSILAGE CUTTER WITH TRAVELING FEED TABLE AND ALL STEEL BLOWER 



The illustration represents the 

 Ross line of Silo Fillers especially 

 desig'ned. for heavy work, such as 

 large Plantations or by Thresher- 

 men for jobbing worlc 



Iiow Down, so that feeder stands 

 on the ground instead of up on 

 machine. Distance from ground 

 to top of traveling table only 3 

 feet 9 inches. The most desirable 

 machine made for convenience of 

 the Feeder. 



Adjustable Bearing's for Blower 

 Shaft. The merits of the adjust- 

 able bearing are known to all 

 practical operators of machinery. 

 No excuse whatever for the Ross 

 Blower Bearings heating or run- 

 ning hard or consuming extra 

 power. 



Blower Casing", with. Swivel and Tilting' Rings. Combination Toothed and Fluted Feed Boilers with Comb Ear Attachment. 

 Steel Shear Bax- with Four Cutting Edges. This feature is accountable for the class of work turned out by the Ross. Start, 

 Stop and Reverse Lever. This arrangement saves many a break and prevents delays of various natures. Traveling Feed 

 Table. Folds up for convenience in moving from place to place and when storing away. Steel Cutting Cylinder. This is a 

 point that must not be overlooked. If saving of time and repairs is worth anything, the BOSS SIXiO FIIiIiEB is worth double 

 the price of any other. Steel Blower. No manufacturer likes to hear of their "Cast Iron" Blowers exploding on large size 

 cylinder type Silo Fillers, but it will occur as long as it is made of Cast Iron. If our example was followed, and the Blower 

 made of SOLID STEEL, like THE BOSS, the welfare of the Silo users would then be taken care of. Capacity, Durability, Sim- 

 plicity in Construction and Quality of "Work have been the principal objects in the construction of Boss Silo Fillers. If these 

 claims are not convincing, - - - ^-r-m -r^-r-.- -r ■r.-a „ 4.„j„i i,. ^, _ 



our claims. 



order the BOSS SIIsO FIIiIiBB and give it a trial. 



Size. 

 No. 16 

 No. 18 

 No. 20 



Knives. 

 4 — 16 inch 

 4 — 18 inch 

 4 — 20 inch 



Capacity per 

 Hour on 1- 

 Inch Cut. 

 Ensilage. 

 10 to 12 tons 

 15 to 18 tons 

 18 to 22 tons 



Extra Gears to cut 4 inclies long, Avith 2 knives: 



Power 

 Required. 

 10 to 12 H. P. 

 12 to 16 H. P. 

 14 to 16 H. P. 

 No. 16, Retail, 53.00. 



The results will be far more convincing than 

 Cutter with 



Traveling Feed Extra Galv. Two 



Table and Blower with Blower Shredder 



30 ft. Pipe and Elbow Pipe, Blades, 



Mounted on Truck, per foot. Extra. 



Weight. Retail. Retail. Retail. 



2600 lbs. $245.00 $ .75 $18.50 



2800 lbs. 290.00 .75 24.00 



2900 lbs. 330.00 .75 28.00 

 No. IS and No. 20. Betail, $3.00. 



Ross Improved Ensilage Cutter WithTraveling Feed Table and Blower No. 1 2 and 1 4 



The Nos. 12 and 14 Ross Silo Fillers are intended for the user who has small power ranging from 8 to 12 Horse Crasoline, 



and who from experience possibly, prefers this style of Silo Filler. The Ross Nos. 12 and 14 have all the important features 

 that the larger Ross Machines have, as shown above, except the following: 



Cutting Apparatus — The knife hubs are cast iron, the same as other makes of machines of this size. This is due to the 

 fact that the work for which they are intended, and the power used to operate them, does not require this extra strength. 



Blowing Apparatus — The disc to which the fans are attached is cast iron. The blowing fans are "Steel" boiler plate. With 

 the exception of the disc being cast iron, the balance of the blowing apparatus is the same as on the larger machines. Guar- 

 anteed in every resjiect. 



Blower Casing is cast iron in two parts .securely bolted together. Equipped with new style pipe connection, including the 

 swivel and tilting rings. This important feature is the same as used on the larger machines. 

 Traveling Feed Table — The same design is used on all Ross Silo Fillers. 



Stop, Start and Reverse lever exactly the same as used on larger Ross Silo Fillers. This device controls the Feed Rolls 

 and Traveling Feed Table. 



Blethod of Driving Blower and Cutter — We use the reliable 3-pulley drive. This has proven to be the most practical method 

 in connection with the new Idler or Belt Tightener. 



low Down and Folding Traveling Table — The Folding Feature is valuable and convenient in many ways. Built low down 

 means the feeder stands on the ground to feed machine instead of getting up on the machine. 



Cutter with Traveling Feed 

 Table and Blower with 



Size. 

 No. 12 

 No. 14 



Knives. 



4 — 13 inch 

 4 — 15 inch 



Capacity per 



Hour on 1- 30 ft. Pipe and Elbow 



Inch Cut. Power Mounted on Truck. 



Ensilage. Required. Weight. Retail. 



6 to 8 tons 8 to 10 H. P. 1700 lbs. $184.25 



8 to 10 tons 10 to 12 H. P. 1900 lbs. 205.25 



Extra Blower Pipe, 

 per foot. 

 Retail. 

 $ .55 

 .55 



Two Shredder 

 Blades, Extra. 



Retail. 



$16.00 

 17.00 



Size. 

 No. 30 

 No. 40 

 No. 50 

 No. 60 



Throat 

 Capacity. 

 38 sq. ins. 

 55 sq. ins. 

 72 sq. ins. 

 85 sq. ins. 



Capacity per 

 I-Iour on 1- 



Inch Cut. 



Ensilage. 



4 to 6 tons 

 6 to 8 tons 



5 to 10 tons 

 12 to 18 tons 



ROSS No. 30, No. 40, No. 50 and No. 60 GUTTERS and BLOWERS 



The knives on flj^wheel type of Ross Silo Filling - 

 Machines witli Blower have made a home for 

 themselves with all their users. This is due to 

 the fact that they possess the required strength 

 and features to enable them to accomplish the 

 work of filling silos in a way that brings comment 

 from all. Realizing the fact that users of this 

 class of goods expect more and more each year in 

 the line of quality and quantity of work, they 

 possess features fully described in the special 

 catc.logue, which we will be pleased to mail, 

 namely:' Four-sided reversible steel cutting plate, 

 positive tension to the feeding rolls, special knife 

 adjustment, self-aligning and adjustable main 

 shaft bearings and roller shaft bearings, extra 

 bearings for main shaft, special balanced main 

 frame, etc. 



Cutter with Traveling Feed Table Blower 



and Blower, not Including Pipe, Includ-Two Shredder 

 Blower Pipe or Elbow. ing Elbow, Blades and 



Weight With- Pr. with Truck. Pr. without Truck, per Foot, 

 out Truck. Retail. Retail. Retail. 



800 lbs. $142.25 $125.25 $ .50 



1250 lbs. 188.25 165.75 .65 



1450 lbs. 197.75 175.25 .65 



1800 lbs. 240.75 218.25 .65 



Power 

 Required. 

 6 to 8 H. P. 

 6 to 8 H. P. 

 8 to 10 H. P. 

 12 to 14 H. P. 



Attachments. 

 Retail. 

 $11.50 

 13.00 

 13.50 

 22.00 



