204 



GRIFFITH ®. TURNER CO. 



Gould's Pyramid Power Pump 



A pump of high efficiency for use 

 where water is not more than 22 feet 

 below pump. The gearing is machine 

 cut of hard cast iron; the cranltshaft 

 is of high carbon open-hearth steel; 

 the bearmgs are lined with best-grade 

 babbitt metal; cylinder is best quality 

 hydraulic iron fitted with brass lining; 

 the valves are rubber-disk tvpe on 

 bronze seats, convenient to get to. 



Size 2%x4, suction and 

 discharge IV4 in., capac- 

 ity 408 gal. per hour. 

 List, $60.00. Our Price, 

 $42.00. 



Size .3x5, suction and 

 discharge IV2 in., 280 

 lbs., 720 gal. per hour. 

 List. $82.50. Our Price, 

 $57.75. 



Size 4x5, suction and 

 discharge 2 in., 325 

 lbs., 1260 gal. per hour. 

 List, $97.50. Our Price, 

 $68.25. 



Air Attachment for either — List, 

 $15.00. Our Price, $10.50. 



Special circular and prices on 

 larger sizes on application. ^ 



Back-Geared 

 5-1. 



Pulleys 



21/2x4- 



. T. & L. 

 3x5 — 15' 

 T. & L. 

 4x5 — 15- 

 T. & L. 



No. 



1139 

 1141 

 1143 



Cylinder and 



Elevation 

 3-in. — 150 feet. 

 5-in. — 150 feet. 

 8-in. — 100 feet. 



Buckeye 



Power Working 

 Heads 



The Buckeye Power Work- 

 ing Heads are built in three 

 sizes, and are carefully de- 

 signed to meet the require- 

 ments of deep-well pumping. 



In addition to lifting the 

 water from the well, they are 

 capable of forcing the water 

 to an elevated tank or reser- 

 voir at any ordinary height 

 above the pump. 



Especial attention is called 

 to tne arrangement of the 

 gear and pinion on these 

 pumps, which secures an al- 

 most vertical lift on the driv- 

 ing rods when the pump 

 plunger is on the up stroke, 

 bringing the wrist pins al- 

 most directly underneath the 

 cross-head when , the pump is 

 required to perform its 

 heaviest work. 



The cross-heads and guides 

 are unusually well con- 

 structed, and prevent entirely 

 the wear of the piston rod in 

 the packing box of the pump. 



The frames of these pumps 

 are of the angle-corner type, 

 tapering in the line of the 

 belt pull from the base, and 

 by disconnecting the piston 

 rod just above the packing 

 nut, and removing the four 

 cap screws which attach the 

 frame to the base, the body 

 of the pump can be hinged out 

 of the way when removing 

 the plunger rod and valves 

 from the well. 



"With air chamber and 

 Size differential plunger 

 Pulleys list Price Our Price. 



5, 7Vi, 10 20x4 in. $80.00 $64.00 



8, 10, 12 20x4 in. 104.00 83.20 



12, 16, 20 30x6 in. 196.00 156.80 



If air chamber is not wanted, deduct from List, $5.00; from 

 Our Price, $4.00. 



Prices on these heads, with iron sub-base and with pinion 

 and gear for motor quoted on application. 



Electric Deep-Well Pumping Head 



This is a moderate- 

 priced deep-well elec- 

 tric working head for 

 moderate - require- 

 ments. Its construc- 

 tion combines the best 

 of materials and ex- 

 cellent design and 

 workmanship; has ac- 

 curate machine-cut 

 gearings, and very 

 long shaft bearings; 

 all gears have shields 

 or covers. 



A2-in. single-acting 

 cylinder against a 

 total lift and force of 

 ISO feet. 



A 25.4-in. single-act- 

 ing cylinder against a 

 total lift and force of 

 125 feet. 



A 3-in. single-acting, 

 cylinder against a to- 

 tal lift and force of 

 90 feet. 



The length of stroke 

 is 6 in. It is tapped 

 to take any size suc- 

 tion pipe up to 3 in.; 

 weight, 500 pounds; 

 size of motor, one-half 

 H. P.; capacity from 

 240 gallons to 550 gal- 

 lons per hour, depend- 

 ing upon the size of 

 cylinder used. 



Price, with 110 or 

 220-volt alternating- 

 current motor — List, 

 $190.00; Our Price, 

 $152.00. 



Add for air pump 

 attacliment to List, 

 $10.00; to Our Price, 

 $8.C0. 



(PIG. 47E) 



Electric House 

 Pump 



(PIG. 45E) 



For pumping from shallow 

 wells, cisterns, or springs. Will 

 force water to a height of 100 feet 

 or less against a pressure of 50 

 lbs.; therefore can be used in con- 

 nection with either open attic 

 tanks or basement pressure tanks. 

 The machine is no plaything, nor 

 a flimsy affair, but is high class 

 in all particulars. The gearing is 

 machine cut and of ample dimen- 

 sions. The cylinder is of brass, 

 with brass valves and piston rod. 

 Gears are shielded, as shown in 

 illustration. Capacity, per hour, 

 150 gallons. Price, with 110 or 220- 

 volt A. C. Motor List, $104.00. 



Our Price, $82.30. 



Automatic 

 Pressure Tank 

 Switch 



(Tig. 44) 



For controlling pres- 

 sure in pneumatic 

 tanks. Will control a 

 variation of about 15 

 pounds in water pres- 

 sure; that is, it can be 

 set to throw out at 50 

 pounds and start the 

 motor again when the 

 pressure has gone 

 down to 35 pounds. 

 Not designed for pres- 

 sure of over 75 lbs. 

 List price of switch as 

 shown in cut. $38.50; 

 Our Price, $30.80. 



