GRIFFITH (a TURNER CO 



^221 



Eagle Screw Plate 



This screw plate is made especially for the farmer. 

 It is made from the best material, and will be found 

 one of the handiest tools on tlie farm. All bolts that 

 have become bruised can be rethreaded In a minute, 

 and save lots of time and worry. Can also be used 

 for tlireading iron rods, wiiicli may be used for many 

 purposes. The sizes run H in., 5-16 in., % in., V2 in. 

 and % in. These are the sizes generally used. Taps 

 and dies are both included in the price, and the whole 

 outfit is pacl<ed in a nice wooden Ijox. 



Price $7.25 



Luther Post Drill 



Luther Post Drills have the feature of 

 higher-priced drills. The frame is built 

 solid, and is well braced. It may be 

 bolted or screwed to a post or an up- 

 right, and holds any ordinary Bit Stock 

 Drill. The work is fed by a hand screw 

 at the top, and can be adjusted to suit 

 the quality of work in hand. When a 

 hole Is to be bored in any material, it is 

 very handy to have one of these drills 

 at hand, as it avoids many hours' delay, 

 if you had to carry the work to a repair 

 .';hop. Tlie size of the work which these 

 drills are capable of doing is altogether 

 according to the hardness of the material 

 which is being bored and the strength 

 of the person doing tlie work. 



Price . 



.$3.50 



Silver & Deming Drills 



No. 112. SHORT IiENGTH. 



Fitting Boynton & Plumer and Silver & Deming 

 Blacksmith's Drill Presses, Nos. 1 and 2, with shanks 

 %-inch diameter. 



Length List Retail Length List Retail 



Diam. 



in. 



Pr. ea. Pr. ea. 



1-8 



i% 



$0.45 



$0.28 



.^)-32 



4% 



.43 



.30 



3-16 



5% 



.50 



.32 



7-32 



5% 



.55 



.35 



1-4 



6 



.60 



.40 



9-32 



6 



.65 



.43 



5-16 



6 



.70 



.45 



11-32 



6 



.73 



.48 



3-8 



6 



.75 



.50 



13-32 



6 



.78 



.52 



7-16 



6 



.80 



.54 



15-32 



6 



.83 



.55 



1-2 



6 



.85 



.56 



17-32 



6 



.88 



.58 



9-16 



6 



.90 



.60 



19-32 



6 



.95 



.64 



5-8 



6 



1.05 



.70 



21-32 



6 



1.10 



.72 



n-16 



6 



1.15 



.76 



23-32 



6 



1.20 



.80 



3-4 



6 



1.25 



.84 



25-32 



6 



1.30 



.87 



The 



above 



drills 



have 



l>iam. 



in. 



Pr. ea. Pi 



. ea. 





13-16 



6 



$1.35 ^ 



S0.90 





27-32 



6 



1.40 



.93 





7-8 



6 



1.45 



.95 





29-32 



6 



1.50 



1.00 





15-16 



6 



1.60 



1.08 





31-32 



6 



1.70 



1.13 



1 





6 



1.80 



1.20 



1 



1-32 



6 



1.90 



1.25 



1 



1-16 



6 



2.00 



1.33 



1 



3-32 



6 



2.10 



1.38 



1 



1-8 



6 



2.20 



1.43 



1 



5-32 



6 



2.25 



1.50 



1 



3-16 



6 



2.30 



1.53 



1 



7-32 



6 



2.35 



1.57 



1 



1-4 



6 



2.40 



1.60 



1 



9-32 



6 



2.50 



1.67 



1 



5-16 



6 



2.60 



1.73 



1 



11-32 



6 



2.70 



1.80 



1 



3-8 



6 



2.80 



1.87 



1 



13-32 



6 



2.S0 



1.93 



1 



7-16 



6 



3.00 



2.00 



1 



15-32 



6 



3.10 



2.07 



1 



1-2 



6 



3.20 



2.13 



inch diameter. 



shanks 2 '4 inches long and 



Machine 

 Bolts 



Carriage 

 Bolts 





















5 ^ 



















Lengi 

 inche 



W 

 M 1-1 



Retai 

 Each. 



List, 

 100. 



Retai 

 Each-. 



List, 

 100. 



Retai 

 Each. 



i.ist, 



IMM. 



Retai 

 Each. 





List. 

 100. 



'B4 



List, 

 100. 



Retai 

 Each. 





Retai 

 Each. 



List, 

 100. 



Retai 

 Each. 





% 





• 



5/16 





% 















% 





5/16 





V2 





1% 



$1.70 



$.03 



$2.00 



$.03 



$2.40 



$.03 



$3.60 



$.04 



1% 



$1.00 



$.03 



$1.90 



$.03 



$1.40 



$.03 



$3.00 



$.04 



2 



1.78 



.03 



2 12 



.03 



2.56 



.03 



3.86 



.04 



2 



1.08 



.03 



2.06 



.03 



1.52 



.03 



3.00 



.04 



2V2 



1.86 



.03 



2^24 



.03 



2.72 



.03 



4.12 



.05 



21/2 



1.16 



.03 



2.22 



.03 



1.C4 



.03 



3.00 



.05 



3 



1.94 



.03 



2.36 



.03 



2.88 



.04 



4.38 



.05 



3 



1.24 



.03 



2.38 



.04 



1.76 



.03 



3.22 



.05 



3V2 



2.02 



.03 



2.4 8 



.03 



3.04 



.04 



4.64 



.05 • 



3% 



1.32 



.03 



2.54 



.04 



1.88 



.03 



3.44 



.05 



4 



2.10 



.03 



2.60 



.03 



3.20 



.04 



4.90 



.05 



4 



1.40 



.03 



2.70 



.04 



2.00 



.03 



3.66 



.05 



41/2 



2.18 



.04 



2 72 



.04 



3.36 



.05 



5.16 



.06 



41/2 



1.48 



.04 



2.86 



.04 



2.12 



.04 



3.88 



.06 



5 



2.26 



.04 



2^84 



.04 



3.52 



.05 



5.42 



.06 



5 



1.56 



.04 



3.02 



.04 



2 24 



.04 



4.10 



.0 6 





2.34 



.04 



2.96 



.04 



3.68 



.05 



5.68 



.06 



5 1/2 



1.64 



.04 



3.18 



.04 



2.36 



.04 



4.32 



.06 



6 



2.42 



.01 



3.08 



.04 



3.84 



.05 



5.94 



.06 



6 



1.72 



.04 



3.34 



.04 



2. 48 



.04 



4.54 



.0 



eVz 



2.50 



.04 



3.20 



.04 



4.00 



.05 



6.20 



.07 



61/2 



1.80 



.04 



3.50 



.04 



2.60 



.04 



4.76 



.07 



7 



2.58 



.04 



3.32 



.114 



4.16 



.05 



6.46 



.07 



7 



1.88 



.04 



3.66 



.04 



2.72 



.04 



4.98 





7% 



2.66 



.01 



3.. 14 



.04 



4.32 



.05 



6.72 



.07 





1.96 



.04 



3.82 



.04 



2.84 



.04 



5.20 



:o? 



8 



2.74 



.05 



3.56 



.05 



4.48 



.06 



6.98 



.07 



8 



2.04 



.05 



3.98 



.05 



2.96 



.05 



5.42 



.07 



9 



2.90 



.05 



3.80 



.05 



4.80 



.06 



7.50 



.07 



8% 



2.12 



.05 



4.14 



.05 



3.08 



.05 



5.64 



.07 



10 



3.06 



.05 



4.04 



.05 



5.12 



.06 



8.02 



.07 



9 



2.20 



.05 



4.30 



.05 



3.20 



.05 



5.86 



.07 



11 



3.20 



.05 



4.2s 



.05 



5.44 



.06 



8.54 



.07 



9 14 



2.2s 



.05 



4.46 



.05 



3.32 



.05 



6.08 



.07 



12 



3.38 



.05 



4.52 



.05 



5.76 



.06 



9.06 



.08 



10 



2!36 



.05 



4.62 



.05 



3.44 



.05 



6.30 



.07 



13 











6.08 



.06 



9.58 



.10 



11 



2.52 



.05 



4.94 



.05 



3.68 



■.05 



6.74 



.07 



14 











6.40 



.06 



10.10 



.10 



12 





.05 





.05 





.05 





.08 



15 



Per Other 





6.72 



.06 



10.02 



.12 





















16 



Sizes 



Write 



7.04 



.06 



11.14 



.12 





















17 



for Prices. 









11.66 



.12 





















IS 















12.18 



.15 





















19 



Por Flow Bolts See 





12.70 



.15 





















20 







Paee 149. 



1 





113.22 

 1 



.15 





















BIT STOCK 

 DRILLS 



POB METAI^ OR WOOD, No. 109. 



All M -inch bolts are packed 100 in package, 

 are packed 50 in package. 



.Ml 5/16-inch, %-inch and 'A-inch bolts 





















. 



t Price, 

 ach. 









meter 



t Pric< 

 Dozei 



ailPr: 

 Dozer 



ail Pri 

 ach. 

















5 







a 





2 



■ 32 



$1.50 



$0.95 



$0.14 



$0.10 



3 



■32 



1.65 



1.00 



.16 



.12 



4 



■32 



2.10 



1.25 



.20 



.15 



5- 



32 



2.60 



1.55 



.24 



.18 



6- 



32 



3.10 



l.SO 



.29 



.22 



7- 



32 



3.60 



2.15 



.33 



.25 



S- 



3 



4.10 



2.E0 



.38 



.23 



9- 





4.70 



2.80 



.43 



.30 



10- 



3 



5.40 



3.25 



.48 



.35 



11- 



9 



6.30 



3.80 



.54 



.40 



12- 



? 



7.20 



4.30 



.62 



.45 



13- 



32 



8.00 



4.80 



.68 



.50 



15- 







9.60 



5.75 



.82 



.55 



16- 



32 



10.30 



6.20 



.87 



.60 



9- 



16 



14.35 





1.20 



.65 





8 



16.15 





1.35 



.75 



3- 



4 



19.75 





1.65 



1.00 



These Drills will fit any brace on 

 the market. Will drill steel, iron or 

 otlier metals as well as wood. Will 

 bore any kind of wood without 

 splitting. 



