^ GRIFFITH ®, TURNER CO^^ i49 



Massey-Harris No. 7 Light Draft Manure Spreader 



Low Down 



Tight Bottom 

 Narrow Tread 

 Wide Spread 



Well suited to dairy and 

 hilly farms 



Regularly supplied with 2-Horse Hitch but 

 can be had with one for three horses 



if desired 

 Wheel Brakes for use in hilly country 

 are available 



All kinds of manures nre handled to advantage with this machine. It has a tipht bottom, is low down, is easy to load, 

 is easy to draw and is narrow enough to be taken into the stable for loading from the gutters if desired. Besides, it is built 

 according to a design which has proven to be both practical and efficient. It is well adapted to every use to which a spreader 

 can be put and furnishes splendid equipment. The front bolster is made in trussed form from steel angles of 3 in. by 

 2 in. by 3/16 in. dimensions and is so placed that the wheels come directly under the load. It extends the full width of the 

 box and is securely bolted to the side sills, thus forming an additional tie for the bed and giving the frame added strength. 



A lathe cut cold colled steel shaft 1% inches in diameter furnishes the rear steel axle which turns in large cast boxes 

 that are bolted directly tn the sills. 



Auto truck at front. The front wheels track with the rear ones and are mounted in the front bolster on 1% in. cold 

 rolled steel stub axles similarly to the front wheels of an automobile. 



Abundant power for every condition is generated by the rear wheels, both of which are drivers. These wheels are 40 

 inches high with 5% inch flanged tires. 



Two beaters and a wide spread distributor do the pulverizing and spreading. Friction is minimized by the use of self- 

 aligning bearings. 



Power for the beaters is furnished direct from a large sprocket by a heavy pin link chain. 



An endless conveyor made up of two chains and several angle steel bars which are riveted to the chain, moves the load 

 to the beaters. 



By simply shifting the feed lever it is possible to spread at the rate of 8, 12. IG or 20 loads to the acre as mav be 

 desired. 



TTice $167.20 



GRITCO STEEL BEAM DIVERSE 

 CULTIVATORS WITHOUT LEVERS 



These cultiva- 

 tors are also very 

 popular in the 

 South for cotton 

 cultivation. 



Each, Ii i s t, 

 $16.00. Retail, 

 $10.00. 



Fenders for 

 above. Iiist, $2.00. 

 Retail, $1.25. 



For Reversible 

 Point .Teeth, add 

 per cultivator, 

 Iiist, $1.60. Retail, 

 $1.00. 



Gauge Wheels, 

 Ust, $2.00. Retail, 

 $1.25. 



List 

 Price. 



Plain $1.20 



With Rev. Points 1.40 



GRITCO WOOD BEAM DIVERSE 

 CULTIVATORS WITHOUT LEVERS 



Each, list, $13.00; Retail, $8.00. 



Fenders for above, I^ist, $2.00; Retail, $1.25. For Reversible 

 Point Teeth, add per cultivator, list, $1.60; Retail, $1.0O. 



WEEDERS AND ATTACHMENTS 



By the use of Weeders much time and labor are saved and 

 better crops grown. These weeders or shallow cultivators, 

 as they are sometimes called, can be worked in dry or wet 

 weather. They will not cut the roots of the crop, but culti- 

 vate just deep enough to retain the moisture where it is most 

 needed. Use a weeder early and often, and you will be sur- 

 prised at the results. It is a good policy to use the weeder 

 after a heavy rain, when the ground has been beaten down, 

 to avoid the forming of a hard crust which retards the gi owth 

 and development of the crops. 



CRITCO FLAT TOOTH WEEDER 



7%-foot Gritco Flat-Tooth Weeder. 



9-foot Gritco Flat-Tooth Weeder.. 

 Extra Teeth. 



