158 ^ GRIFFITH ®, TURNER CO ^ 



Wade In 25 and 30-tooth 

 section and with. 9/16-in. 

 teetb. 



GritGO Guarded Frame Lever Harrow 



The U-bars, channels, oscillating bars and leetfi are 

 made of high carbon steel. The channels, being placed 

 at the ends of the U-bars, prevent them from catchingf 

 on obstructions, as is frequently the cuse with the open- 

 end harrow. Strong and well made, buti 

 carrying no superlluous weight. Corner 

 braces, oscillating castings and level 

 castings of malleable iron, list Our 

 Price. Price.] 



25-Tooth Harrow, 9/16-in. i 

 Teeth; Weight, 190 lbs. . $14.40 $8,751 

 50-Tooth Harrow, 9/16-in. 



Teeth; Weight, 195 lbs . 33.50 20.2S 

 60-Tooth Harrow, 9/lG-in. 



Teeth; Weight, 215 lbs . 37.70 21.7S! 



75-Tooth 52.80 31.7£ 



90-Tooth 59.30 35.7: 



dIv 1 



o» '. 



for 

 ■Sim 

 jj I 



■IB 1 

 till: 



,;irfii 



llQll B 



BALTIMORE DOUBLE HINGE HARROW 



List Our 

 Price. Price. 

 40-Tooth $27.00 $17.00 

 50-Tooth 30.0O 18.00 

 This is a two-section, wood-frame, spike tooth Harrow. 

 The runners, as seen in the cut, are intended to be used m 

 carrying the Harrow from one field to another. 



GaRDIVER'S HARROW 



This Harrow is similar to the Baltimore Double Hinge Har- 

 made in one section instead or 



row, noted above, only it is 



two. It is designed to be used with one horse, 

 this harrow with 30 teeth, which cuts 4 feet 6 

 and with 25 teeth, cutting 3 feet 8 inches wide. 



25-Tooth $16.00 



30-Tooth 17.00 



We furnish 

 inches wide, 



$10.00 

 11.00 



GRITGO WOOD BAR LEVER HARROW 



- iithi 

 ivfr 



: iiclii 

 or a' 



. !0»1 

 wn. 



'ord 



olieatr 



TeetJ'fcoiB 



j ince. 



Bars 

 s e a s o n e 

 oak, riveted J 

 each tooth, 

 headed and made frorpiln 

 best quality steel. Pram 

 painted red. teeth black; combi 

 nation draw bars furnished for twc 

 three and four-section harrows when ordered. List Our 



Price. Prici' 



No. 2450 — 2-Section, 50-9/16-inch Teeth $40.00 $25.0' 



No. 2560 — 2-Section, 60-9/16-inch Teeth 43.50 27.5! 



i:llif v 

 Dtttr 

 Ik ( 



50-Tooth $19.50 60-Tnoth 



Massey-Harris Spike Tooth Harrow 



Service of a lasting order is built into this simple implemer, 

 just the same as it is into the Massey-Harris machines the 

 are far more complex. High carbon steel predominate 

 throughout the construction and all the parts have ample stif 

 ness both to retain their shape under real hard usage an: 

 to resist the twisting strains to which they are subjected i 

 field operation. 



Stout Frame Sections. Two end bars made from steel chai 

 nels, five cross bars made from steel "U" bars and a wic 

 steel centre bar make up the frame sections. The channel bai 

 tie the cross or tooth bars at their ends, hold them in lir 

 and prevent them from catching trash. The center bar acl 

 as an additional tie for the cross bars and also furnishes 

 support for the shifting lever ratchet. At the left rear co 

 ner of the sections and at the right front one a stout brai 

 of malleable iron is used. The arrangement of the cro! 

 bars is such that although each of them has the same tool' 

 spacing none of the teeth trail. 



Strong tooth fasteningr. Each tooth is he 

 in place by a U-shaped steel clamp and one bo 

 The clamp furnishes a double bearing for til T 

 tooth, around which it fits snugly at two pointiistlif 

 and sets in the "U" of the bar so that the bac'tlels 

 edge of the tooth is brought up tightly into note 

 es provided for the purpose in the two bar edge 

 The tooth is thus rigidly held at four poini 

 Sufficient clearance is provided between the clan 

 and the bottom of the "U" of the tooth bar t 

 taking up wear. 



Tlexihle construction. The tooth bars are join; 

 to the end bars in such a way that they can hinl 

 perfectly and still permit eacli frame section ' 

 conform to the lay of the land. The harrow , 

 thus given ample flexibility to work successful 

 in all fields. This flexibility is increased by t 

 method of hitching the sections to the draw b 

 wherein each one is attached separately. T 

 position of the teeth in relation to the surface 

 the ground is controlled by a lever on each s( 

 tion and is easily and quickly changed. At t 

 four corners of each section a runner tooth 

 placed to facilitate transportation to and frc 

 the field. 



.$22.00 75-Tooth $31 



ALL PRICES IN CATALOG- SUBJECT TO CEAXTGE ■WITHOUT NOTICE. 



