^ GRIFFITH ®, TURNER CO. ^^173 



tABGEB SAW MIZ.i:.S 

 I.ATKB MII.I.S 

 SHINGI.E MII.i;.S 

 BAND SAWS 



] Prices on Application 



Variable Belt 

 Feed Saw Mill 

 No. I 



SPECIFICATIONS \. f -3iSS.*r 



STANDARD NO. 1 VABIABLE BBI.T FEED SAW MIIiZi. 



Husk Frame is 7'x3', built of 31/>"x'jV. ' timbers, fitted with Man- 

 el 2%6"x5S"; Pulley 20"xS"; Variable Belt Feed; Saw Guide, Board 

 )lls and Spreader. 



Carriage 16 ft. long', built of 3%"x5%" timbers: four trucks, set under c:i:"-ia e. having 

 i" axles, babbitted boxes with waste "chambers and 6" flat and grooved whi ' ls; 40 ft. 

 flat and V rolled steel track, fitted to way timbers, framed up in sectii ii--: iwn head- 

 jcks with "Champion" dogs, opening 34" "from saw line; Ideal Set Work.s ami quick 

 ceder and Ifi ft. of set shaft, key-seated full Icngtli. Also BeU Tightener, foundation 

 Its, cant hook, oil can, wrenches and a set of 4" feed belts. 



Saws up to 52" diameter may be used, but are not part of regular equipment. 



Weight with resular equipment, 3,150 lbs. 



Weiglit witli Heavy Balance Wheel Pulley, 3,500 lbs. 



Any size of mandrel pulley up to 24", if ordered with mill, furnished without extra cost. 



Longer carriage and track, additional head blocks, or extended mandrel furnished at additional cost. 



When way timbers are not wanted they may be left off, track irons only being furnished, and price reduced accordingly. 

 Belt tightener is not needed when long thresher belts are used and may be left off and price deducted. 

 Right-liand mills are always furnished unless left-hand is specified in order. 



When used with a Fordson Tractor we recommend that the Mandrel Pulley be our special 24"x8" heavy-rim Pulley, 

 hich weights 400 lbs. and serves also as a balance wheel. This pulley is furnished at small extra cost. 

 No. 1 — Standard Saw Mill with rack and pinion drive, without saw. 

 track with way timbers are not wanted, deduct 

 not wanted, deduct Write for Special Catalog'ne and Prices. 



AIOEBICAN W.1T.T. SAWS 



-inch Inserted Tooth, Our Special Price 



-inch Inserted Tooth, Our Special Price s 



-inch Inserted Tooth, Our Special Price 



NO. 57 SAW FRAME 



QUICKLY ATTACHED 



The frame is carried on four castings attached to the 

 Dper and lower ends of the radiator by four bolts that run 

 front and in back of the radiator. Thus, you attach the 

 over Frame without disturbing one single bolt or nut on 

 e Fordson, also without drilling any special holes or fur- 

 shing any special equipment. 



The frame is shipped knocked down with instructions for 

 senibling with all of the equipment illustrated, and which 

 eludes the frame, 30-inch saw, sufficient length of 5-inch 

 bber belt, 8x6 inch pulley on saw mandrel, and special 

 ^^■^ startin.cr crank that slips through the 

 - - ' , frame to permit starting with tht 



\ frame attached. Shipping weight, 

 knockeddown, -j^ 

 pounds. 



$54.50 



No. 1 Saw Mandrel — made from finest cold- 

 rolled steel, l~Ao" diameter, 49 in. long. Has Self- 

 Alis'ning Bearings, lubricated with hard oilers. 

 Furnished with machined flywheel IS^i" diameter, 

 eight 65 lbs., 6x6" pulley and is turned for saw with 1%" hole. 

 Comes complete witli .=aw collars, nut and keys. 

 Price $16.00 



CANT HOOKS 



PEAVIES 



Cant Hooks, No. SISB — 21% in. x I f:. Price $4.00 



Cant Hooks, No. 318B — 2% in. x 4'/^ ft. Price '. 4.50 



Peavies, No. 9 — 2% in. x 5 ft. Price s.oo- 



