82 



GRIFFITH b TURNER CO., 205 N. PACA ST., BALTIMORE, MP, 



HOOSIER WELL PUMPS 



Fig. 7904 Fig. 7994 Tig. 8113 Tig. 8553 Tig. 1050 Fig. 1038 



Tig. 7904. — Hoosier Open Top Hand Lift Pump, with wrought set length. It has large cast head, swivel bearer top, long 

 handle and adjustable. The Standard or Barrel is made of 1% inch pipe, and has the anti-freezing feature. 3-inch iron cylin- 

 der. Price, $9.25. 



Tig. 7994. — Hoosier Hand Force Pump, wrought set length, anti-freezing, has swivel bearer top, polished steel piston rod, 

 brass stuffing box, compression cock spout and back inlet. Standard is tapped for pipe just below spout, and with the usual 

 drip hole directly above cylinder makes the pump anti-freezing. Fitted with 3 inch brass lined cylinder. Price, $14.50. 



Tig. 8113. — Hoosier Windmill Force Pump, wrought set length, anti-freezing; has detachable polished piston rod, brass 

 stuffing box, swivel bearer top, back outlet and detachable compression cock spout. The bearer top has removable guide 

 bushing to prevent pump rod wearing directly on bearer guide. 2% inch Brass Lined Cylinder, 6 inch stroke, weighs 81 

 pounds. Price, $18.00. 



Pig". 8553. — Hoosier Windmill Underground Force Pump, double acting, with wrought set length, anti-freezing. The pump 

 has brass upper cylinder, positive three-way cock with union connection. Has adjustable platform base, fitted with 1 inch 

 goose neck spout, and 1 inch three-way discharge. By removing upper cylinder and cap, the plunger valve can be withdrawn 

 without disturbing the pump. Suitable for well from 25 to 125 feet in depth. Without Cylinder, Price, $17.00. 



Tig. 1050. — Hoosier Combination Set Length Pump and Jack. For hand, windmill or belt power. For shallow or deep 

 wells. In this pump you get a true alignment of the jack and pump, with no side strain or uneven wear on the parts. Has 

 cast gears and strong pitmans. Tight and loose pulleys. By removing upper cylinder and cap the plunger valve can be 

 withdrawn without disturbing the pump. Can be used with lYt, lVz> 2, 2% or 3-inch pipe. Price, $42.00. 



Tig. 1038. — Hoosier Combination Pump Standard and Jack. Back geared 5 to 1, is designed to be operated by hand, wind- 

 mill or belt power, for shallow or deep wells. This combined pump and jack is compact, strong and easy to install. Built 

 in two sections, between which is a detachable flange, the upper section being the large air chamber with flanged top to 

 which is bolted the flange bearer, making a firm connection; the lower section or barrel and main frame of the jack are of 

 one-piece construction. This gives a true and permanent alignment of the jack and pump. Equipped with cast gears. The 

 pinion shaft is extra long. Pitmans are made of heavv angle steel. The pitmans, gears, pinions and all wearing parts have 

 No-Oil-Em Bearings. Has tight and loose pulleys. Adjustable stroke, 6 to 10 inches. One piece 1 1-16 inch piston rod, brass 

 covered; brass stuffing box; compression cock spout with hose connection and back outlet. The jack has sufficient clearance 

 above floor to admit of pulley being used as large as 30 inches. Suitable for wells from 25 to 200 feet. Weighs 190 pounds. 

 Price, $35.00. 



Tig. 8584. — Hoosier Easy-Fix Windmill Force Pump. Single Acting, with detachable cast standard, for heavv service. 

 Has positive Three Way discharge and brass hand wheel screw for regulating the three way distributing valve. Under- 

 ground discharge elbow as union connection, Brass Stuffing Box and Brass Covered Piston Rod, fitted with IV- inch pipe air 

 barrel. 



The stuffing box is set in extra cap or flange which screws into the bottom casting. By removing stuffing box cap the 

 plunger may be withdrawn without disconnecting the pump. Bearer is provided with removable pump rod guide bushing to 

 prevent wear directly on the bearer guide. 



The bottom flange is interchangeable for the size cylinder or pipe to be used. Price of pump without cylinder, $19.60. 



ADDITIONAL FOR FITTING PUMPS 



We give below a table of the additional charge for fitting, and the amount stated in table is to be added to the price of the 

 pump selected. In fitting pumps we use galvanized pipe and galvanized pump rod and a strainer foot valve. For wells 26 

 feet deep or less we leave the cylinder 5 feet below platform. For wells deeper than 26 feet we place the cvlinder close to the 

 bottom of the well. 



Depth of 



Well. 

 10 feet. . 

 feet. . 

 feet. . 

 feet. . 

 £eet . . 



12 

 14 

 16 

 18 



Prices Subject to Change Without Notice. 



With 114 -in- 

 Pipe for 

 2% -In. and 3-in. 

 Cylinder Pumps 

 $3.55 

 4.00 

 4.40 

 4.85 

 5.30 



Depth of 

 Well. 



With IVi-in. 

 Pipe for 

 2 \'z -in. and 3-in. 

 Cylinder Pumps 



20 

 22 

 24 

 26 



28 

 30 



feet, 

 feet, 

 feet, 

 feet, 

 feet . 

 feet . 



$5.75 

 6.20 

 7.30 

 7.80 

 8.36 

 8.90 



Depth of 

 Well. 



32 

 34 

 36 

 38 

 40 

 42 



feet . 

 feet, 

 feet, 

 feet . 

 feet, 

 feet. 



We Use an Extra Good Foot Valve. 



With 1'4 -in- 

 Pipe for 

 2% -in. and 3-in. 

 Cylinder Pumps 



$9.50 

 10.00 

 10.60 

 11.10 

 11.70 

 12.25 



Depth of 

 Well. 



2V6 

 Cyl 



44 feet 



46 feet 



48 feet 



50 feet 



Each addi t iona I 

 foot 



ith XV* -in. 

 Pipe for 

 -in. and 3-in. 

 inder Pumps 



$12.75 

 13.30 

 13.85 

 14.40 



.27 



f LI. PRICES IN CATALOG SUBJECT TO CHANGE WITHOUT NOTICE. 



