7\ 



Oliver "CHp-Cut" Mower 



The first really new mower in over 75 

 years and the finest mower on the market. 

 Handles alfalfa, timothy, soy beans, lespe- 

 deza and other crops with equal satisfaction. 

 The famous "Clip-Cut" cutter bar does 

 more and better work. There are more knife 

 sections and the guards are spaced 2J^" 

 apart. Each knife section takes a short bite, 

 does less work, but all knife sections working 

 together do more and better work. Less 

 power is needed to drive the knife, draft is 

 lighter and the drag on the cutter bar is re- 

 duced. The balanced 4-square frame holds 

 the cutter bar to its work. The gears run in 

 oil and are mounted back of the axle, giving 

 better balance, and takes the weight ofif the 

 horses' necks. These features make the 

 "Clip-Cut" run 10% to 15% lighter than 

 old-fashioned mowers. There are many 

 other features that make the "Clip-Cut" do 

 better work and last for years. 3J^" wide 

 cast wheels and extra sickle furnished. 

 Zerk fittings. 



No. 114V. Vertical lift. Hi ft. bar. . .$98 75 



No. 114V. Vertical lift, 5 ft. bar 100 00 



For tractor hitch instead of 2-horse 



hitch 5 00 



Write for prices of mower with rubber 

 tires. 



Oliver Dump Rake 



Rake lifts the instant pressure is applied to 

 dump pedal. Three different "down" posi- 

 tions and four "up" positions. Strong hot 

 riveted angle steel frame. Bridge trussed. 

 Heavy truss rod runs entire length of frame, 

 to support center. Steel tooth holders. 

 Heat treated spring steel teeth. Strong 

 wheels. Furnished with shafts, singletrees 

 and single coil runner point teeth. 



8 ft.; 24-tooth, 420 lbs $47 80 



9 ft.; 24-tooth, 435 lbs 50 00 



10 ft.; 26-tooth, 460 lbs 51 90 



Wheel guard tooth with rake 50 



SEE PAGE 42 FOR 

 EVERY TYPE OF 

 FERTILIZER. 



Oliver Side-Delivery Rake 

 and Tedder 



Combines in one machine the best means 

 of raking and curing every kind of hay crop. 

 The rolling action of the rake turns the 

 heads of the hay into the center of an airy 

 windrow to make higher quality hay. Strong 

 frame. No wrapping on cylinder. Roller 

 bearing C5dinder and wheels. Machine can 

 be turned from rake to tedder and back again 

 by shifting a lever. Castor wheel, long pole, 

 zerk fittings and grease gun furnished. 



No. 1-B. 8 ft. 8". 51-tooth. Weight 



973 lbs 123 75 



For Side Delivery Rake only, less 

 tedder gear, deduct from combined 

 machine price 3 15 



Oliver Closed-Deck Loader 



Gently handles the hay from windrow or 

 swath, to retain the full food value of the 

 crop. The floor and sides of the loader bed 

 are made of smooth, galvanized iron. There 

 are no ridges, "washboard" surfaces, braces 

 or other obstruction to shatter the leaves. 



The loader bed is flat at the cylinder, 

 gradually curves away and is decidedly con- 

 cave at the top. The hay works toward the 

 center of the bed, feeding on to the load in 

 a fairly narrow width for easy handling. 



The three-bearing crankshaft turns 

 smoothly and has an even raking bar action. 



The tines are located on top of the rake 

 bars so there is less chance for clogging. 



The carrying wheels run in roller bearings. 

 The ground and tractor wheels are close to- 

 gether, keeping the cylinder operating at an 

 even distance from the ground. This is a 

 decided advantage in uneven fields. The 

 trailer wheels are adjustable up and down 

 by levers. 



No. 2. 6' closed-Deck Loader. 



Weight, 1167 lbs $148 45 



9-D Oliver Superior 

 Variable Drop Planters 



The 9-D handles hybrid as well as or- 

 dinary field corn. Variable Drop device is 

 adjustable to plant 2, 3 or 4 kernels per hill. 

 Adjustable for 30" to 48" rows. Available 

 as Check-Row Planters, Drills or with Auto- 

 matic Hill-Drop device to plant hills 28" to 

 76" apart. Furnished with 3 sets flat drop 

 plates, for small medium or large kernels. 

 Plates for practically all seeds available. 

 Center reel. New type friction clutch. Pole 

 arranged for toggle or ring neckyoke. 



No. 9-D. Runner Planter with check 

 wire, automatic drag marker, less 



trees and yoke $84 70 



No. 9-D. Runner Planter, no check 

 wire, with automatic drag marker, 



less trees and yoke 71 55 



No. 9-D. Drill Planter with auto- 

 matic drag markers, less trees and 



yoke 68 75 



For Double Disc Openers, add 3 45 



For Fertilizer Attachment, add 18 75 



For Double Trees and Neck Yoke, 



add 3 65 



Oliver Superior Drills 



The best known drills on the market. 

 Famous for accuracy. Zerk fittings. Roller 

 bearing axles. Popular sizes listed. 



No. 26 Fertilizer Plowfur Disc Drills or 

 Spring Hoe, with drag chains. No seat, agi- 

 tator or scrapers. With Grass Seeder. 



8 X 8-in. disc; 2-horse hitch; 1 pole. .$152 50 

 10 X 8-in. disc; 2-horse hitch; 1 pole. . 174 40 



9 X 7-in. disc; 2-horse hitch; 1 pole. . IBO 95 



10 X 7-in. disc; 2-horse hitch ; 1 pole. . 170 95 



11 X 7-in. disc; 2-horse hitch; 2 poles. ISO 30 

 13 X 7-in. disc; 3-liorse hitch; 2 poles. 208 45 



8 X 8-in. spring hoe; 2-horse hitch; 1 



pole 148 15 



10 X 8-in. spring hoe; 2-horse hitch; 



1 pole 168 15 



9 X 7-in. spring hoe; 2-horse hitch; 1 



pole 155 30 



10 X 7-in. spring hoe; 2-horse hitch; 1 



pole 164 70 



Larger sizes available with Tractor Hitch. 



90 



GRIFFITH & TURNER CO., 205 N. PAGA ST., BALTIMORE, MARYLAND 



