GRIFFITH <& TURNER CO. ^ 



103 



MODERN ONE-HORSE DRILL. FIVE DISKS 



SHAFTS HINCED-NO WEIGHT ON THE HORSE 



OUR 



WHEELS 

 CADDY 



the; 



LOAD 



Just the thing for the Farmer, Truck Farmer and Gardener. 

 Cups are fitted for sowing peas, beans, ensilage, corn and 

 .^ugar beet seed, as well as wheat, rye, flax and oats. 



With the disks set 7 inches apart, the distance between 

 outside disks is only 28 inches (or S inches apart is 32 inches), 

 so that the drill will safely pass between corn rows 36 inches 

 or wider apart. List Our Special 



Price. Price. 



Price $41.60 $33.25 



Extra for Truck Wheel 3.00 2.40 



Fertilizer Attachment extra 9.00 7.20 



Grass Seeder Attachment extra 4.50 3.60 



Extra for Oat Agitator 2.00 1.60 



Extra for Widening 1 and Narrowing- Lever . 2.00 1.60 



THE PLYMOUTH DISK GRAIN DRILL 



A 



This is a very good drill at a low pric . 



It is practical and made of the best material. It is the only 

 drill on the market that has a footboard going entirely across 

 the drill, because other drills are not strong enough to stand it. 



The feed cups are of the latest pattern. 



The scrapers for disks are adjustable and of spring steel. 

 Prices include Fertilizer Attachment. List Our Special 



Price. Price. 



8- Disk $96.30 $77.00 



9- Disk 102.00 81.50 



10- Disk 107.20 85.75 



11- IMsk U2.90 90.25 



THE PLYMOUTH HOE DRILL 



Holler-Bearings in the Axle Boxings make this machine very 

 light in draft. It feeds accurately and does not break the seed. 



List Our Special 

 Price. Price. 



8- Hoe Spring $91.70 $73. CO 



9- Hoe Spring 98.10 78.50 



10-Hoe Spring 105.00 84.00 



8- Hoe Pin 88.50 70.75 



9- Hoe Pin 94.30 75.50 



10- Hoe Pin 101.00 80.75 



U-Hoe Pi n 107.00 85.50 



GRAIN DRILL POINTS 



We are one of the largest Distributers of 

 GRAIN DRILL POINTS AND TUBES 



in the Country. 

 For All the Leading Grain Drills. 

 IN ORDERING POINTS, either send an 

 old one or give name of Drill, length of 

 point, and be sure to give distance from cen- 

 ter of hole to end of point. It is always 

 best, If possible, to send an old sample. 



Price, Points, each .10c. 



YORK GRAIN AND FERTILIZER 

 DRILL 



Both the grain and fertilizer are positive force feeds, and 

 will sow with absolute regularity any kind of grain or ferti- 

 lizer in good condition. The grass seeder is also a force feed, 

 and can be used either in front or rear of the hoes; also quan- 

 tity can be changed to any amount necessary. It is fastened 

 on the frame and very low down, thus preventing the wind 

 from blowing the seed away before reaching the ground. The 

 fertilizer feed can be stopped or started at any time while the 

 drill is in motion, which makes it convenient in case the oper- 

 ator does not wish to sow fertilizer wnile going over the ground. 

 8-Hoe Pin $68.75 10-Hoe Spring $79.50 



9-i.i^e P.n ' 72.2 j 



10- Hoe Pin 76.00 



11- Hoe Pin 79.C0 



8- Hoe Spring 72.25 



9- Hoe Spring 76.00 



11-Hoe Spring 



8- Disk Drill. 



9- Disk Drill. 



10- Disk Drill. 



11- Disk Drill. 



83.25 

 74.75 

 78.25 

 82.50 

 86.50 



GRAIN DRILL TUBES 



Galv. Conductor. 



IN ORDERING TUBES it is always best to send an old 

 tube as a sample. If that cannot be done, be sure to state 

 name of Drill, the kind of Tube, whether ring flange or plain 

 top, or special bell-shaped top with straps, and by all means 

 the length and diameter at top and bottom. 



Plain Tubes, each 25c. 



Bell Top Tubes, with strap, each 35c. 



Flat or Ring Flange Tubes, each 30c. 



Galvanized Conductors, each 40c. 



ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE. 



