138 



GRIFFITH <a TURNER CO. 



Buckeye Power Working Head 



The Buckeye Power Working Heads 

 are built in three sizes and are carefully 

 designed to meet the requirements of 

 deep well pumping. Especial attention 

 is called to the arrangement of the gear 

 and pinion on these pumps, which se- 

 cures an almost vertical lift on the 

 driving rods when the pump plunger is 

 on the up stroke, bringing the wrist pins 

 almost directly underneath the cross- 

 head when the pump is required to per- 

 form its heaviest work. The frames of 

 these pumps are of the angle corner 

 type, tapering in the line of the belt 

 pull from the base to the top. The 

 frame is hinged to fhe base, and by dis- 

 connecting the piston 

 rod just .above the 

 packing nut and re- 

 moving the four cap 

 screws which -attach 

 the frame to the base, 

 the body of the pump 

 can be hinged out of 

 the way when remov- 

 ing the plunger rod 

 and valves from the 

 well. 



The cross-head and 

 guides are unusually 

 well' constructed and 

 prevent wear of the 



Fig". 1478. 



No. 

 139 

 141 

 143 



Maximum Well 

 Cylinder and 

 Elevation. 

 3" — 150' 

 5" — 150' 

 8" — 100' 



piston 

 packing 

 pump. 



rod 

 box 



of 



the 

 the 



Stroke. 



12, 



10, 

 16, 



10 



12 

 20 



Size 

 Pulleys. 

 20x4 in. 

 20x4 in. 

 30x6 in. 



Speed of 

 Pulley 

 Shaft. 

 210 

 180 

 150 



Price. 

 $50.00 

 75.00 

 150.00 



Air Chambers Extra. Ratio of Gear, Sis to One. 



Gould's Pyramid Power Pump 



A pump of high effi- 

 ciency for use where 

 water is not more than 

 22 feet below pump. 

 Constructed with a 

 view to strength and 

 efficiency. The gear- 

 ing is machine cut of 

 hard cast iron; the 

 crankshaft is of high 

 carbon open-hearth' 

 steel; the bearings are 

 lined with best-grade 

 babbitt metal, pro- 

 vided with extra large 

 oil pockets; cylinder 

 is best quality hy- 

 draulic iroji fitted 

 with brass lining: the 

 -valves , are rubber- 

 disk type on bronze, 

 ■seats, -- -convenient to ' 

 get to. 



Size 3x5, suction 

 and discharge 1% in., 

 280 lbs., 720 gal. per 

 hour. List, $55.00. 

 Our Price, $45.00. 



Size . 4x5, suction 

 and discharge 2 in., 



325 lbs., 1260 gal. per hour. List, $65.00. Our Price. $52.50. 

 Above pumps back geared 5-1, with 15-in. T. L. Pullevs. 

 Air Attachment for either — List, $15.00. Our Price,' $12.00. 

 Special circular and prices on larger sizes on application. 



DOUBLE ACTING HOUSE 



P 



Century Double-Acting Force and Tank Pump 



The construction of this pump is such that all the valves are lo 

 cated on top of the pump. Each valve can be reached independently 

 by removing the individual cap located immediately over it. The 

 valve seats are biass, with a full 2-inch water-way which does not 

 restrict the flow of water, and causes the pump to operate easily. 

 The valves are metal, faced with rubber, and are of the poppet 

 pattern, which raise clear from the seat, preventing any foreign 

 substance from lodging under them. The Cylinder is highly pol- 

 ished. The piston rod is made from 13-16-inch drawn polished steel, 

 and has a heavy brass stuffing nut. The handle is reversible; car 

 be placed on either end, making it a right or left hand pump. The 

 suction and discharge ports are fitted for hose and threaded on the 

 inside for 2-inch iron pipe. The base is separate from the pump tc 

 which it is firmly bolted. 



5x5 Cylinder, capacity at 40 strokes per minute, 2000 gals, per hour 

 No. 470 — Pump with hose nipple, hose attachment, hose band and 

 strainer. Price, $7.00. 



HOSE HAND 



3-inch brass-lined cylinder, 

 brass valve seats, rubber-faced 

 valves and brass-covered piston 

 rod. Strongly made and tested 

 under pressure before leaving 

 factory. Working parts are 

 readily accessible. 



No. 2S6. List Price, $14.00; 

 Our Price, $10.00. 



No. R 286 — Same as No. 2S6. 

 but with cog gear handle. List 

 Price, $15.00; Our Price, $11.00. 



For either of the above, fitted 

 with Brass Air Cylinder to be 

 used, with compressed air 

 water supply tanks, add to 

 List, $3.00; to Our Price, $2.00. 



ALL PRICE o SUBJECT TO CHANGE WITHOUT NOTICE. 



