O0 



^ GRIFFITH <a TURNER CO. g g 



139 



Fig. 45 E Electric House Pump 



For pumping from shallow 

 wells, cisterns or springs. Will 

 force water to a height of 100 feet 

 or less against a pressure of 50 

 pounds; therefore can be used in 

 connection with either open attic 

 tanks or basement pressure tanks. 

 The machine Is no plaything nor a 

 flimsy affair, but is high class in 

 all particulars. The gearing is 

 machine cut and of ample dimen- 

 sions. The cylinder is of brass, 

 with brass valves and piston rod. 

 All are of ample dimensions, in- 

 suring long wear. The pinion on 

 motor shaft is rawhide, insuring 

 quiet running. Motors used are 

 self-starting under full load, and 

 can be attached to regular house- 

 light lines. The machine being 

 upright and wholly self-contained, 

 occupies but little space. Gears 

 are shielded, as shown in illustra- 

 tion. Capacity per hour, 150 gal- 

 lons. Price, with 110 or 220-volt 

 A. C Motor — List, $104.00. Our 

 Price, $75.00. 



Automatic Pressure Tank Switch 



(FIG. 44) 



For controlling pres- 

 sure in pneumatic 

 tanks. Will control a 

 variation of about 15 

 pounds in water pres- 

 sure; that is, it can be 

 set to throw out at 50 

 pounds and start the 

 motor again when the 

 pressure has gone down 

 to 35 pounds. Not de- 

 signed for pressure of 

 over 75 pounds. List 

 Price of switch as 

 shown in cut. $38.50. 

 Our Price, $30.00. 



Goulds Power Working Head 



(FIG. 1518) 



Very strong and substantial, 

 the entire frame being cast in 

 one piece. The gear and crank 

 plate are pressed and keyed on 

 the main shaft. The gear and 

 pinion are of charcoal-iron ma- 

 chine cut. Main and pinion 

 shafts run in large babbitted 

 bearings. By taking out the 

 bolts of the well-cover flange 

 in base of pump the plunger 

 can be drawn from well with- 

 out disturbing pipe connections 

 or moving working head. This 

 head is suitable for operating 

 single-acting deep-well cylin- 

 ders in wells from 50 to 250 

 feet deep, depending upon the 

 size of the cylinder and the 

 total lift and force. The stroke 

 is adjustable to either 6, 8 or 

 10 in. The base will take any 

 size suction pipe up to 3 in.: 

 back gearing is 5-1; the pulleys 

 are 16x3; weight 3 7-5 pounds. 

 List Price, $£0.00. Our Price, 

 $60.00. If air chamber is 

 wanted, add to list $10.00; to 

 Our Price. $8.00. If air attach- 

 ment for pneumatic tank work 

 Goulds Fig. 1518. is wanted, add to List $15.00; 



Power Working Head. to Our Price, $12.00. 



Electric Deep-Well Pumping Head 



(FIG 47E) 



This is a moderate- 

 priced deep-well elec- 

 tric working head for 

 moderate require- 

 ments. Its construc- 

 tion combines the best 

 of materials and ex- 

 cellent design and 

 workmanship; has ac- 

 curate machine-cut 

 gearings and very 

 long shaft bearings; 

 all gears have shields 

 or covers. This out- 

 fit is self-contained 

 and very compact, and 

 yet very convenient. 

 The sub-base features 

 allow it to be re- 

 moved without dis- 

 turbing base on foun- 

 dation or well-pipe 

 connections, so that 

 plunger and valves 

 can be pulled out for 

 repairs. The capacity 

 of this head is as fol- 

 lows: 



A 2-in. single-act- 

 ing cylinder against a 

 total lift and force of 

 180 feet. 



A 2^-in. single-act- 

 ing cylinder against 

 a total lift and force 

 of 125 feet. 



A 3-in. single-act- 

 ing cylinder against a 

 total lift and force of 

 90 feet. 



In pneumatic tank 

 work each pound of 

 pressure is equivalent 

 to 2 ft. elevation. We price the outfit with the type of motor 

 most generally used, and prices on it equipped witli other 

 motors will be quoted on application. The length of stroke is 

 6 in. It is tapped to take any size suction pipe up to 3 in.; 

 weight 500 pounds; size of motor iy 2 H. P.; capacity from 240 

 gallons to 550 gallons per hour, depending upon the size of 

 cylinder used. 



Price, with 110 or 220-volt alternating-current motor — List. 

 $190.00. Our Price, $135.00. 



Add for air pump attachment to List, $10.00; to Our Price, 

 $8.00. 



Belt Drive Working Head 



(FIG. 47) 



The same head as the Fig. 47E, except that it is arranged 

 with 15-in. tight and loose pulleys for belt drive instead of 

 having electric drive. List Price, $95.00. Our Price. $70.00. 



Extra for air pump — List, $10.00. Our Price, $8.00. 



Electric Porcelain 

 Spark Plug 



The Electric Porcelain Spark Plug 

 meets witli universal satisfaction in 

 either pleasure cars or heavy trucks 

 and tractors. Quality and workman- 

 ship are guaranteed. It is made in 

 V 2 -in. Standard Pipe Thread, Stand- 

 ard Metric and A. L. A. M. 

 Threads. Weight about 4i£ ounces. 

 Price, 75c. 



Surprise Cotton 

 Waste 



A carefully prepared waste speci- 

 ally suited to the requirements of 

 threshermen, sawmill men and for 

 general use around agricultural ma- 

 chinery. Put up in 5, 10 and 50-lb. 

 packages. 



Prices — 5-lb. package. $1.00; 10-lb. 

 package, $1.80; 50-lb. bale. $7.50. 



Alii FBICES SUBJECT TO CHANG! WITHOUT NOTICE. 



