GRIFFITH @. TURNER O) 



123 



The York Grain and 

 Fertilizer Drill. 



BOTH the grain and fertilizer are positive force feeds, 

 and will sow with absolute regularity any kind of 

 grain or fertilizer in good condition. The grass 

 seeder is also a force feed, and can be used either in front 

 or rear of the hoes : also quantity can be changed to any 

 amount necessary. It is fastened on the frame and very 

 low down, thus" preventing the wind from blowing the 

 seed awav before reaching the ground. The fertilizer feed 

 can be stopped or started at any time while the drill is 

 in motion, which makes it convenient in case the operator 

 does not wish to sow fertilizer while going over good 

 ground. 



8- Hoe Pin $05.00 



9- Hoe Pin 68.00 



10- Hoe Pin Il'S? 



11- Hoe Pin 74.0O 



8- Hoe Spring JJ'SS 



9- Hoe Spring < 3.00 



10- Hoe Spring 76.00 



11- Hoe Spring 7'J.OO 



SPECIAL PRICES FOR CASH. 



TKe Thomas Disc 



ilizer 



THE Celebrated "Marks" Fertilizer Feed is used on this 

 Drill. The device for changing quantity is entirely new 

 and has been thoroughly tested, and consists of a simple 

 speed gear direct and adjustable mounted on the axle. The 

 flow - is stopped automatically when the discs are raised. 

 When spotting shocks in sowing corn ground, can be thrown 

 out of gear without raising the discs. 



DISC BOOT Our Delivery Disc Boot is specially designed 



and very complete, and prevents choking or clogging in any 

 soil. There is a chilled iron spindle, which will last for 

 years, if it will ever wear out. The scrapers for discs are of 

 spring steel, and are pdiustable. 



8- Disc Drill .*75.00 10-Disc Drill $80. OO 



9- Disc Drill 80.00 11-Disc Drill 90.00 



SPECIAL PRICES FOR CASH. 



8- Hoe Spring $70.00 



9- Hoe Spring 75. OO 



ln-Hoe Spring 80.00 



11- Hoe Spring 85.00 



12- Hoe Spring 90.00 



8- Hoe 



9- Hoe 



10- Hoe 



11- Hoe 



12- Hoe 



Pin $05.00 



Pin 70.00 



Pin 75.00 



Pin 80.00 



Pin 85. OO 



SPECIAL PRICES FOR CASH. 



GRAIN DRILL TUBE*. 



Galvnnizoil 

 Conductor. 



Grain Drill P i»t»« 



We Are One of the 

 Largest Distributors of 



Grain Drill Points and Tubes 



in the Country. 



For all leading Grain 

 Drills, including York 

 Superior, Pennsylvania, 

 Bickford & Hoffman, 

 Buckeye, Hoosier, In- 

 diana, Champion, Em- 

 pire. MeSherry, Hag- 

 erstown, Greencastle, 

 etc. 



IN ORDERING POINTS, either send 

 an old one or give name of Drill, length of 

 point, and be sure to give distance from 

 center of hole to end of point. It is always 

 best, if possible, to send an old sample. If 

 our customers will carefully comply with 

 the foregoing directions it will be a mutual 

 saving of an immense amount of time. 

 Price. Points, e ach lOc. 



IN ORDERING Tl'BES it is always 

 best to send an old Tube as a sample. If 

 that cannot be done, be sure to state name 

 of Drill, the kind of TnUe, whether with 

 ring llnnue or plain top. or special 

 bell-shaped top with straps, and by all 

 means the length and diameter at top and 

 bottom. _ _ 



Price, Plain Tubes, each Z~ 



Bell Top Tubes, each i£ : *-5ir 



Price, Flat or Ring Flange Tubes, each. -5c. 

 Price, Galvanized Conductors. each...40c. 



ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE. 



