GRIFFITH <a TURNER CO. 



131 



SWEEP HOR5E POWERS 



TWO-HORSE No. 6. 



Can be used with one or two sweeps. This is the same power as we 

 furnish with our two-horse Mill and Power combined. The tumbling 

 rod makes 60 revolutions to one walk of the horses, has ratchet 

 knuckle, and two sweeps can be attached to the power when desired, 

 so as to hitch one horse to each sweep. Weight of power about 600 

 pounds. 



Price with one Sweep $35.00 



Price with two Sweeps 38.00 



FOUR-HORSE No. 7. 



WITH TWO SWEEPS. 



This power is constructed on the same principle as our two-horse 

 power, but is much heavier and stronger. The train of gearing Is 

 direct. The weight of power, complete with two sweeps, tumbling 

 rod and pulley, is about 925 pounds. Speed of tumbling rod. 81 revolu- 

 tions to one walk of the horses. Length of sweeps, 12 feet, requiring 

 a circle of 27 feet in diameter for walk of horses. Furnished with 

 20 or 24-inch pulley. Price $55. OO. 



Agricultural Suction Hose. 



Specially designed for use on our Low Down 

 Force Tank Pumps. This hose is composed of 

 good rubber on the exterior, the interior having 

 a galvanized, flat spiral wire to give the hose the 

 required rigidity and prevent it from collapsing. 

 The ends for about 6 inches are of soft rubber, 

 without the wire, for the purpose of enabling the 

 operator to fasten securely together. Made in 

 10-foot sections. This hose is used for all suc- 

 tion purposes, such as draining cellars, cis- 

 terns- etc. 



PLAIN BORE, GALVANIZED, FLAT 

 SPIRAL WIRE. 

 Per foot 40c. 



RUBBER BELTING 



FOR AGRICULTURAL AND OTHER 91 ACH INERT. 



We can furnish a full line ot fhis fine. Rubber Belting, but only 

 larry in stock the following sizes : 



Xist Price Retail Price 

 Per Foot. Per Foot. 



J-inch, 3-ply 2«c. 13c. 



5-inch, 4-ply 31c. l«c. 



Mnch. 3-ply 34c. 17c. 



l-inch. 4-plv 42c. 21c. 



i-inch, 3-ply 43c. 22c. 



>-ineh, 4-plv 52c. 26c. 



J-inch, 4-ply 62c. 31c. 



Special Prices for Cash. 

 Larger and smaller sizes on application. 



CUT RAW-HIDE BELT LACING 



%-inch. 

 ^4-inch. 

 %-inch. 



List price, per 100 feet fl.BO 



List price, per 100 feet 2.00 



List price, per 100 feet 2.75 



Special Prices in Bundles of lOO Feet. 



(For Belt Punches. See Page 133.) 



Scientific No. 15 Shuck 

 Corn Grinding Mill 



For 5 H. P. Gasoline Engine. 



SIMPLE 



STRONG 



PRACTICAL 



This mill is built upon new princi- 

 ples embodying the results of the 

 largest experience in the making of 

 Grinding Mills of all kinds. The con- 

 struction is very simple and yet com- 

 plete in every way— and some entirely 

 new features employed— a quick re- 

 lease and also an adjustment for 

 keeping the plates apart when run- 

 ning emptv. Strong in design and of 

 liberal proportions, with large bear- 

 ings heavily babbitted and best mate- 

 rial and construction everywhere. Ca- 

 pacity per hour, 12 to 18 bushels. 

 Weight, complete, 400 pounds. Speed, 

 revolutions per minute 

 1000. Price, $37.00 



Scientific No. 

 10 Small Grain 

 Grinding Mill 



For 3 H. P. Gasoline 

 Engine. 



This is the only small power mill on the market that is really effi- 

 cient and of requisite strength for good service. To the strong yet 

 simple design is added the latest and best improvements — particu- 

 larly the quick release, which also has the feature of holding the 

 grinding plates apart when running empty. It is the easiest of all 

 mills to take apart. Simply open the case and the plates are entirely 

 exposed. No pulleys, etc., to be removed. Heavily babbitted bearings. 

 Extra strength everywhere. 



Capacity per hour, 12 to 18 bushels. 



In grinding rye, barley, oats and similar small grains, the best re- 

 sults are secured by mixing with them in grinding 25 to 50 per cent, 

 shelled corn. 



Weight, complete 350 pounds. 



Speed, revolutions per minute 1000 



Price $32.00 



Spur and Bevel Gear Jacks. 



This machine is intended to increase speed and trans- 

 mit power by belt. The spnr senr transmits the motion 

 at a right angle with the tumbling rod, and the bevel 

 gear transmits It in a line with tumbling rod and gives 

 the band wheel two revolutions to one of the tumbling' 

 rod. Price $12.00. 



SPECIAL DISCOUNT FOR CASH. 



