38 



P. MANN & CO., WASHINGTON, D. C. 



THE IMPERIAL "U" BAR LEVER HARROW 



The Imperial "U" Bar Lever Spike - Tooth 

 Harrow is made in a strictly first-class manner 

 throughout. In const* uction this Harrow has 

 many advantages over those of other manufac- 

 turers. The frame of the Harrow is channel 



steel, of good 

 weight and 

 strength. The "U" 

 Bars pass through 

 the main frame of 

 the Harrow, and 

 are held in posi- 

 tion by a malle- 

 able clamp. The 

 construction gives 

 great strength to 



the Harrow and at the same time allows flexibility. Each section is fitted with four steel runners, one 

 attached to each corner, for transportation. These runners, when the Harrow is at work, are on top of 

 the frame and do not obstruct. By throwing the lever forward the runners are thrown down in a posi- 

 tion which carries the entire Harrow off the ground. 



No. Price. No. Price. 



370— 1-section, 25 ^-inch teeth, 97 pounds $12.00 375— 2-section, 60 ^-inch teeth, 215 pounds $24.00 



371_2-section, 50 ^-inch teeth, 173 pounds 22.50 372— 3-section, 75 ^-inch teeth, 290 pounds 30.00 



BROWN GARDENERS' HARROW 



Made in one section. Contains 30 and 24 teeth. 

 It has no equal as a tool for market gardeners. De- 

 signed to be used for one horse, and is easily handled 

 in small garden plots. The Harrow is strong and 

 durable and is furnished with runners for trans- 

 portation. 



25-tooth Harrow, cuts 3 feet 8 inches wide $10.50 



30-tooth Harrow, cuts 4 feet 6 inches wide 11.00 



40-tooth Harrow. Double Hinge 17.00 



"CUTAWAY" SINGLE-ACTION HARROW 



Regular, With Tongue Truck 



The mere fact that the CLARK "CUTAWAY" Single-Action Har- 

 row has established satisfactory records is proof that it is made of 

 high quality material and constructed along the most efficient lines. 

 To obtain these results it is built up to a standard determined by 

 actual field tests. 



The illustration on this page is the CLARK "CUTAWAY" Single- 

 Action Harrow equipped with tongue truck. Note that the head is 

 built directly on top of the gangs and that the tongue, seat, braces 

 and levers are attached to it, making the disks carry the entire 

 weight of the machine. This construction gives such perfect bal- 

 ance that there is practically no weight on the horses' necks, 

 making it optional whether a tongue truck is used or not. It also 

 means penetration, as the weight of the driver and the machine 

 is over the disks and is utilized in increasing the efficiency of the 

 harrow. The gangs are controlled by two levers conveniently placed, which allow them to be worked 

 together or independently. When used in half-lap these separate levers are an important feature. Single- 

 action harrows, to render satisfactory service, really need to be reversible. The CLx\RK "CUTAWAY" 

 Single-Action Harrow is reversible — that is, the gangs can be swung end for end, so that the soil may 

 be thrown either out or in. To reverse it is only necessary to pull the cotter pins that hold the lever 

 links, drop the links, swing the gangs around and reattach them. 



The disks are made of a high-grade quality of cutlery steel and the edges are FORGED SHARP. The 

 bearings are oil-soaked hardwood and are dust-proof. 



This practical construction signifies light draft and efficiency, which are two of the outstanding features 

 of CLARK "CUTAWAY" Implements. 



A-4-8-16 — Clark's Harrow, Single Disk (with Tongle), weight 255 pounds $46.15 



X-4-8-18— Clark's Harrow, Single Disk (with Fore Truck), weight 295 pounds 58.35 



