g g GRIFFITH ®. TURNER CO g gifl 



The "Gritco" Runner Spring Tooth Lever Harrow 



15 TOOTH 

 258 LBS. 



17 TOOTH 

 276 LBS. 



15 TOOTH, $27.50 

 17 TOOTH, $30.00 



An Ail-Steel, Low-Down lever Spring' Tooth Harrow with 

 Renewable Steel Runners. 15 or 17 Teeth. Two Sections. 



The Frame is made of special "T" Steel forged in one 

 piece. 



Renewable Steel Shoes are bolted onto the underside of 

 the frame to take the wear, so that no wear comes on the 

 frame itself. These shoes can be renewed at a slight ex- 

 pense, making the harrow practically indestructible. 



The Teeth are made from the best Open Hearth Steel, 

 finely tempered in oil and fully warranted, and can be in- 

 stantly raised or lowered by means of the levers. 

 As the point of the tooth wears, same can be low- 

 ered by adjustment on the tooth bars. 



The Shape of the harrow is correct to make 

 it run steadily and smoothly and permit the teeth 

 always to work at a uniform depth; teeth can be 

 easily raised or lowered, to transport from field. 



Construction is simple. It is durable and does 

 not require a man and wrench to keep it in work- 

 ing order. 



Gritco Lever Wheel Harrow 



285 BBS. 

 15 TOOTH, 



17 TOOTH, 

 300 BBS. 



15 TOOTH $30.00 



17 TOOTH $32.50 



Gritco Alfalta Harrow 



The Main Frame is constructed entirely 

 of double "I" steel of high carbon. The 

 frame surrounds the teeth, and there are no 

 projecting parts to engage obstruction. Cross 

 Bars are IVi-lnch structural tubing, and have no holes drilled through them; 

 compression clamps instead of bolts being used for fastenings. 



The Arrangement of Teeth. — The front bar carries four, middle bar 6ix, 

 and rear bar seven teeth in the 17-tooth machine. Best arrangement possible. 



Teeth are of regulation size, 1% inches wide, %-inch thick, are made of 

 best quality of spring steel and fully guaranteed against imperfection. 



Tooth Holders. — By our method of constructing tooth holders, or clamps, 

 teeth may be readily adjusted and kept in line. 



The Carrying' Wheels are constructed with broad rims and the bearing 

 surfaces are chilled. The Bever Racks are strong and durable, being made of 

 malleable iron. It is painted with a heavy coat of green paint. 



Seat attachment will be furnished at extra price, when so ordered. Price 



$2.00. 



The above illustration shows a harrow spe- 

 cially designed to cultivate alfalfa fields. The 

 teeth, being made of spring steel, provide the 

 necessary relief to allow the round, long 

 points to dodge around the crown of the plant 

 without injury to it. The depth of cultiva- 

 tion is regulated by the levers. 



This harrow has all the improvements found 

 on the Gritco Runner Harrow. It runs steady 

 and smoothly. In transporting from field to 

 field the teeth are raised by the levers. 



Made in one size only. 

 23-Tooth 



$42.00 



Spring Harrow Teeth 



WOOD FRAME HARROW, STEEL LINED 



16-tooth Harrows $16.25 



18-tooth Harrows 17.50 



20-tooth Harrows 19.25 



22-tooth Harrows 21.75 



Lined, Guarded. Protected Bolt 

 Heads, Perfect Tooth Seat. The 

 best of "Wood Frame" Harrows. 



For All Beading Harrows, 



Price, 60c. each. 



When taken in full sets, spe- 

 cial price. 



