GRIFFITH @, TURNERCO^i87 



The American Variable Friction Feed Sawmills 



American Sawmills are recognized as embodying superior design, the most advanced and up-to-date ideas, superior 

 workmanship, and, in short, they are outfits which have been carefully thought out by designers of wide experience for the 

 purpose of giving to sawmill operators the most practical mills possible. 



American No. 1 Standard Sawmill 



Our No. 1 Mill is adapted to any power from 6 to 15 H. P. It is war- 

 ranted capable of cutting 2000 feet of board lumber per day with a good. 

 6 H. P. steam engine, if properly handled, and is capable of turning out 

 7000 to 8000 feet per day with a 15 H. P. engine. Any size up to 52 inches 

 may be used, and the carriage will carry logs up to 36 inches diameter. 



A complete Standard No. 1 Mill consists of the fol- 

 lowing: — HUSK FRAME 7 feet by 3 inches, built of 

 2V 2 in. by 7% in. timbers, fitted with Variable Friction 

 Feed, Polished Steel Mandrel 2 3/16 in. by 4 ft. 4 in. 

 long. Mandrel Pulley, 20 in. by 10 in. (unless otherwise 

 specified) ; also Board Roll, Spreader Wheel and Saw 

 Guide. 



CARRIAGE 16 ft. long, 26 in. wide, built of 

 timbers 3% in. by 5% in., having Feed Rack 

 22 ft. long. Four Trucks with 6 in. wheels and 

 1% in. steel axles. 40 ft. of "V" and Flat 

 Rolled Steel Track, fitted to way timbers 

 framed up in sections. Two Head-blocks, open- 

 ing 34 inches, with Champion Duplex Dogs. 

 "Ideal" Set Works, with Quick Receder and 14 

 ft. of polished steel Set Shaft; also Belt Tight- 

 ener, foundation bolts, cant hook, oil can and 

 wrenches. Saw is extra, according to size and 

 style selected. Weight of mill as above, 2800 

 lbs. flf way timbers are not wanted, deduct 

 450 lbs.) 



No. 1 — Standard Saw Mill, with rack and pinion drive, with- 

 out saw. List Price, $310.00. Our Special Price, $217.00. 

 With Wire Cable Carriage Drive, without saw. list Price, 

 $335.00. Our Special Price, $234.50. If track with way timbers 

 are not wanted, deduct from List Price $20.00, from Our Spe- 

 cial Price, $14.00. If Belt Tightener is not wanted, deduct 

 from List Price $15.50; from Our Special Price, $10.85. 

 Write fer catalog of larger sizes. 



AMERICAN MILL SAWS. 

 48-inch Solid Tooth. List Price, $75.00; Our Special 

 Price 



Cant Hooks, No. 318B — 2% in. x 4 ft. 

 Cant Hooks, No. 318B — 2% in. x 4% ft. 

 Peavies, No. 9 — 2% in. x 5 ft. Price... 



American Gang Lath Mill 



Can be furnished as a lath mill only as shown by illustra- 

 tion or as combined lath mill and bolter. The best machine 

 of the kind on the market, possessing valuable features not 

 found on any other make. It is adapted to cutting lath slats 

 or crate stock of any width from % inch to 3 inches of various 

 thickness; also small dimension stock from % by y 2 inch 

 up to 3 inches by 3 inches. 



Three Saws fur- 

 i s h e d , unless 

 otherwise ordered, 

 but can be fitted to 

 carry six; capacity 

 30,000 to 50,000 

 laths per day. 



List Price. 

 Our Price. 



With 3 Saws. 

 $130.00 



With 4 Saws. 

 $134.00 



Combined Lath Machine and Bolter. 



List Price $200.00 



Our Price 



Special Feed for Slats and Dimension Stock. 

 List Price $12.00 Our Price 



$204.00 



50-inch Solid Tooth. 



Price 



48-inch Inserted Tooth. 



cial Price 



50-inch Inserted Tooth, 

 cial Price 



List Price, $85.00; Our Special 

 List Price, $120.00; Our Spe- 

 List Price, $i34!66; OurSpe- 



UP-TO-DATE" SHINGLE MACHINE 



It will make 

 shingles, head- 

 i n g , box 

 boards, crate 

 slats, etc., 

 equally well. 

 Carriage is 

 very substan- 

 tial, and pro- 

 vided with a 

 strong iron 

 yoke that will 

 admit saws up 

 to 36 inches in 



diameter; 24-inch saw is regularly furnished. Can be used 

 either as hand power or power feed machine. When ordered 

 an edger and knot saw with 8-inch saw and a convenient 

 gauge are furnished. Capacity from 3,000 to 1<0,000 shingles 

 per day, depending upon power, character of work and expert- 

 ness of operator. Weight with edger, 625 pounds; power 

 required, 4 to 8 H. P. Complete with edger and 24-inch 

 shingle saw and 8-inch edging saw. List Price, $115.00; Our 

 Special Price, Without edger, but with 24-inch shingle 



saw, List Price, $100.00; Our Price, 



American Contractor's Portable Variety Wood Worker 



A time-saver; a money-maker. Take it right to the job, and do your 

 work on the job, as you want it, when you want it. Built for work, and 

 lots of it. The saw gauge and jointer fence are instantly removable for 

 cutting off long lumber. What it is — a rip saw, a cut-off saw, a mitre 

 saw, a scroll saw, a Dado machine, a gaining machine, a grooving ma- 

 chine, a rabbitting machine, a tenoning machine, a jointer or planer, 

 a rabbitting machine, a matcher, a molder, a sander, a hollow chisel 

 mortiser. These can be furnished with gasoline engine built in, making' 

 them self-contained, or where electric current is available with electric 

 motor built in. Net prices, f. o. b. factory. Complete with Hollow 

 Chisel Mortiser, Boring Attachment and Jig Saw: 

 With 5 H. P. Four-Cycle Gasoline Engine and Magneto built in, including; 



Hollow-Chisel Mortiser and Boring Attachment, with Jig Saw 



Same without Engine and Inside Belt 



Same with Countershaft and Inside Belt, without Engine 



The following can be left off and prices deducted accordingly: 



Hollow Chisel Mortiser-Boring Attachment, if not wanted, deduct 



Jig Saw, if not wanted, deduct 



Hollow Chisel Mortiser only (leaving on plain Borer), deduct 



