168^ GRIFFITH <& TURNER CO.^ 



LARGER SAW MILLS 

 LATHS MILLS 

 SxtlKC LE MILLS 

 BAKB SAWS 

 Prices on Application 



American 

 "Heaeock" 

 Variable Belt 

 Feed Saw Mill 

 No. I 



SPECIFICATIONS X 

 STANDARD NO. 1 VARIABLE BELT PEED SAW MILL. % %^ 



Husk Frame is 7'x3', built of 8%"x9}£" timbers, fitted with Man- ^*^~«~-_ ' 



drel 2% 6 "x58"; Pulley 20"x8"; Variable Belt Feed; Saw Guide, Board 

 Rolls and Spreader. 



Carriage 16 ft. long, built of 3%"x5%" timbers: four trucks, set under carriage, having 

 1%" axles, babbitted boxes with waste chambers and 6" flat and grooved wheels; 40 ft. 

 of flat and V rolled steel track, fitted to way timbers, framed up in sections; two head- 

 blocks with "Champion" dogs, opening 34" from saw line; Ideal Set Works and quick 

 receder and 16 ft. of set shaft, key-seated full length. Also Belt Tightener, foundation 

 bolts, cant hook, oil can, wrenches and a set of 4" feed belts. 



Saws up to 52" diameter may be used, but are not part of regular equipment. 



Weight with regular equipment, 3,150 lbs. 



Weight with Heavy Balance Wheel Pulley, 3.500 lbs. 



Any size of mandrel pulley up to 24", if ordered with mill, furnished without extra cost. 



Longer carriage and track, additional head blocks, or extended mandrel furnished at additional cost. 



When way timbers are not wanted they may be left off, track irons only being furnished, and price reduced accordingly. 

 Belt tightener is not needed when long thresher belts are used and may be left off and price deducted. 

 Right-hand mills are always furnished unless left-hand is specified in order. 



When used with a Fordson Tractor we recommend that the Mandrel Pulley be our special 24"x8" heavy-rim Pulley, 

 which weights 400 lbs. and serves also as a balance wheel. This pulley is furnished at small extra cost. 



No. 1 — Standard Saw Mill with rack and pinion drive, without saw. List price $475.00. Our Special Price $427.50. 

 If track with way timbers are not wanted, deduct from List Price $24.00, from Our Special Price, $21.60.. If Belt Tightener 

 is not wanted, deduct from List Price $15.00; from Our Special Price, $13.50. 



Write for catalog of larger sizes. 



AMERICAN MILL SAWS 



48-inch Inserted Tooth, Our Special Price $108.00 



50-inch Inserted Tooth, Our Special Price..... 120.00 



52-inch Inserted Tooth, Our Special Price 132.00 



NO. 57 SAW FRAME 



QUICKLY ATTACHED 



The frame is carried on four castings attached to the 

 upper and lower ends of the radiator by four bolts that run 

 in front and in back of the radiator. Thus, you attach the 

 Stover Frame without disturbing one single bolt or nut on 

 the Fordson, also without drilling any special holes or fur- 

 nishing any special equipment. 



The frame is shipped knocked down with instructions for 

 assembling with all of the equipment illustrated, and which 

 includes the frame, 30-inch saw, sufficient length of 5-inch 

 rubber belt, 8x6 inch pulley on saw mandrel, and special 

 starting crank that slips through the 

 frame to permit starting with the 

 frame attached. Shipping weight, 

 knockeddown, 2ou 

 pounds. 



$54.50 



SAW MANDRELS 



No. 1 Saw Mandrel— made from finest cold- 

 rolled steel, 1%6" diameter, 49 in. long. Has Self- 

 Aligning Bearings, lubricated with hard oilers. 

 Furnished with machined flywheel 15%" diameter, 

 weight 65 lbs., 6x6" pulley and is turned for saw with 1%" hole. 

 Comes complete with saw collars, nut and keys. 

 Price $16.00 



CANT HOOKS 



PEAVIES 



Cant Hooks, No. 318B — 2% in. x 4 ft. Price. 

 Cant Hooks, No. 318B — 2% in. x 4% ft. Price. 

 Peavies, No. 9 — 2% in. x 5 ft. Price 



o. 



!i( 



.$4.00 I 

 4.50 |t 

 5.00 



