GRIFFITH ®. TURNER CO 



165 



Gritco Guarded Frame Lever Harrow 



The U-bars, channels, oscillating' bars and teetn are 

 made of high carbon steel. The channels, being placed 

 at the ends of the U-bars, prevent them from catching 

 on obstructions, as is Irequently the case with the open- 

 end harrow. Strong and well made, but 

 carrying no superfluous weight. Corner 

 braces, oscillating castings and lever 

 castings of malleable iron, liist Our 

 Price. Price, 



25-Tooth Harrow, 9/16-in. 



Teeth; Weight, 190 lbs. . $14.40 $8.75 

 50-Tooth Harrow, 9/16-in. 



Teeth; Weight, 195 lbs . 33.50 20.25 

 60-Tooth Harrow, 9/lG-in. 



Teeth; Weight, 215 lbs . 37.70 21.75 



75-Tooth 52.80 31.75 



90-Tooth 59.30 35.75 



BIKLTIMORE DOUBLE HINGE HARROW 



List Our 

 Price. Price. 

 40-Tooth $27.00 $17.00 

 _ 50-Tooth 30.00 18.00 



This is a two-section, wood-frame, spike tooth Harrow. 

 The runners, as seen in the cut, are intended to be used in 

 carrying the Harrow from one field to another. 



GAROIVER'S HIXRROW 



CRITCO WOOD BAR LEVER HARROW 



This Harrow is similar to the Baltimore Double Hinge Har- 

 row, noted above, only it is made in one section^ instead oi 



two It is designed to be used with one horse 

 this harrow with 30 teeth, which cuts 4 feet 6 

 and with 25 teeth, cutting 3 feet 8 inches wide. 



25-Tooth $16.00 



30-Tooth \7.Q0 



We furnish 

 inches wide, 



$10.00 

 11.00 



50-Tooth $19.50 



60-Tooth 



Bars of 

 seasoned 

 oak, riveted at 

 each tooth. Teeth 

 headed and made from 

 best quality steel. Frame 

 painted red. teeth black; combi- 

 nation draw bars furnished for two, 

 three and four-section harrows when ordered. list Our 



Price. Price. 



No. 2450 — 2-Section, 50-9/16-inch Teeth $40.00 $25.00 



No. 25C0 — 2-Section, 60-9/16-inch Teeth 43.50 27.50 



Massey-Harris Spike Tooth Harrow 



Service of a lasting order is built into this simple implement 

 just the same as it is into the Massey-Harris machines that 

 are far more complex. High carbon steel predominates 

 throughout the construction and all the parts have ample stiff- 

 ness both to retain their shape under real hard usage and 

 to resist the twisting strains to which they are subjected in 

 field operation. 



Stout Prame Sections. Two end bars made from steel chan- 

 nels, five cross bars made from steel "U" bars and a wide 

 steel centre bar make up the frame sections. The channel bars 

 tie the cross or tooth bars at their ends, hold them In line 

 and prevent them from catching trash. The center bar acts 

 as an additional tie for the cross bars and also furnishes a 

 support for the shifting lever ratchet. At the left rear cor- 

 ner of the sections and at the right front one a stout brace 

 of malleable iron is used. The arrangement of the cross 

 bars is such that although each of them has the same tooth 

 spacing none of the teeth trail. 



Strong: tooth, fastening-. Each tooth is held 

 in place by a U-shaped steel clamp and one bolt. 

 The clamp furnishes a double bearing for the 

 tooth, around which it fits snugly at two points, 

 and sets in the "U" of the bar so that the back 

 edge of the tooth is brought up tightly into notch- 

 es provided for the purpose in the two bar edges. 

 The tooth is thus rigidly held at four points. 

 Sufficient clearance is provided between the clamp 

 and the bottom of the "U" of the tooth bar for 

 taking up wear. 



PlexiWe construction. The tooth bars are joined 

 to the end bars in such a way that they can hinge 

 perfectly and still permit each frame section to 

 conform to the lay of the land. The harrow is 

 thus given ample flexibility to work successfully 

 in all flelds. This flexibility is increased by the 

 method of hitching the sections to the draw bar 

 wherein each one is attached separately. The 

 position of the teeth in relation to the surface of 

 the ground is controlled by a lever on each sec- 

 tion and is easily and quickly changed. At the 

 four corners of each section a runner tooth is 

 placed to facilitate transportation to and from 

 the field. 



$22.00 75-Tooth . ■ .$31.00 



ALL PRICES IN CATAIOG SUBJECT TO CHANGE WITHOTTT NOTICE, 



